29 Comments

  1. What type of timber is the bookcase made from, It looked like very flat clear knot free wide boards, better than Pine I have seen available.
    Also the top board looked like it was made from two boards edge joined , did Paul buy them like that or did he join them together.

    1. The side boards are laminated as well, I don’t think you will find boards as wide from a single trunk, and if you do, I suspect the price to be very steep. But I agree, I haven’t seen boards as neat as Paul’s anywhere I went looking for wood, yet.

      1. Sorry, I didn’t read your question correctly. But Paul does mention the facing of the inner tree side when he plains the ends square, which sounds to me like he bought them like that.

        1. The bookcase is made from pine or more accurately, redwood pine, which we get from the local timber merchant. This is the same type of pine we have used for all the projects so far. This is a very nice, clear batch that Paul managed to get this time. We bought them already edge jointed and sanded, but you could edge joint them yourself if you can’t get hold of the wider stock.
          Phil

  2. @Paul: what I didn’t understand is why you clamped the cupped board in the vice flat. If you release it, it will still be cupped. Won’t that be a problem when it comes to joining them or come to think of it, will they be pulled straight by the joints?

    1. When I am planing wide boards like these, I simply follow the cupping because all I want is to plane them smooth and not flatten them as they will flatten when clamped and glued. This works less the narrower you go down in width. Also, I often position my board in the vise in such a way that when I apply vise pressure, the cupped boards compress half the thickness of the board and so flattens the board for planing. My boards were consistently flat for the main part.

  3. When you give us a cutting list is that the thickness, length etc the boards should be to start with or how they should end up?

    I realise that I plane a board down I’ll lose a few mm so will a 21mm board end up as 17-19 perhaps in the finished piece?

    1. I think most people don’t realise how little I take off when I am planing. It’s always a very small fraction of a millimetre. I am literally shaving a little over 3-4 thou off the surface to remove the machine marks and other defects. I planed most of the sanded surfaces because I didn’t like the look of the sanded surface too.. the I applied shellac as sanding sealer and sanded with 240-grit.

  4. 1/8″= 3.2mm
    1/4″= 6.35mm
    3/8″=9.5mm
    5/16=7.5mm
    3/4″=19mm
    13/16″=21mm
    7/8″=22mm
    1″=25.4mm
    1 1/8″=28mm
    1 1/4″=32mm
    1 1/2’=38mm
    2″=51mm
    2 3/4″=70mm
    3″=76mm
    4″=102mm
    5″=127mm
    6″=152mm
    7″=178mm
    7 7/8″=200mm
    8″=204mm
    9″=229mm
    10″=254mm
    11″=279mm
    12″=305mm
    15 7/16″=392mm
    2’=610mm
    34″=864mm
    34 3/4″=882mm
    3’=915mm
    37″=930mm
    38 1/2″=978mm
    39 5/16″=998mm
    71 5/8″=1820mm
    6’=1831mm
    72.16’=22 linear meters.
    I was board measurements close approximates

  5. Thanks for that Mark, that was very helpful and saved me a lot of time. I am putting together an imperial cutting list. I will just check it with Paul, then ask Resi to put it up alongside the metric cutting list above.
    Phil

  6. Phil,
    I agree that having the imperial measurements listed alongside the metric ones on the projects would be VERY useful for those of us in America that foolishly still work in the imperial measurement system. I love the fact that Paul usually references both imperial and metric measurements in the videos as this is helping me to become accustomed to thinking in millimeters. I doubt that I will ever switch to the metric system entirely since I have so many thousands of dollars invested in imperial tools making the prospect of converting to the metric system rather impractical. However, I frequently wish I would have gotten my woodworking start those many years ago using metric measurements. Unfortunately, I was self-taught and I didn’t know that this would be a consideration. If I ever mentor an aspiring woodworker I will ensure that s/he learns to think in mm and acquires metric tools. The math (or maths for my friends across the pond) required of metric measurements seems so much cleaner and easier and makes me less prone to error. If one of Paul’s future projects winds up being a time machine I will go back 12 years and start my woodworking career using the metric system. đŸ™‚

    1. xjumper,
      “foolish”
      synonyms: stupid, silly, idiotic, witless, brainless, vacuous, mindless, unintelligent, thoughtless, half-baked, harebrained, imprudent, incautious, injudicious, unwise; ill-advised, ill-considered, impolitic, rash, reckless, foolhardy, daft; informaldumb, dim, dimwitted, halfwitted, thick, crack-brained, crackpot, pea-brained, wooden-headed, dumb-ass, chowderheaded

      There’s a considerable discussion over in the site technical forum under Metric vs Imperial.
      Best,
      Craig

  7. I am really looking forward to starting on the bookcases (3) for my living room. I really love the design and the joinery looks to be quite sufficient for a sturdy case over the long haul.

    I noticed a small error in the cut list. the Imperial measurements for the two dividers should read 13/16″ x 7 7/8″ x 15 7/16″.

  8. Hi Paul and team

    I am planning to build the bookcase, having attended a recent course. I find 21mm timber very difficult to locate. Do you think using 18mm timber would weaken this design?

    thank you!

    John B

  9. Think this shelf would still be ok if I didn’t include the bottom shelf? I need to create a book shelf that leaves all that space open (For example, if I were to put it over the back of a commode). I can still put some boards across the back of the bottom for stability, I was just curious how well it would work with one shelf missing and the majority of that lower space empty.

  10. Thanks for this wonderful design and series. I’m in process of building my bookshelf. As I prepare to layout the dadoes and mortises on the sides, I’m wondering if I should reconsider the approx. 15″ spacing between shelves. I’ve read elsewhere that bookshelf spacing is typically 8 to 12 inches, and my kids, who I’m building this for, do tend to collect a lot of short paperbacks. Smaller spacing, at least on the top shelves, may allow space for an extra shelf or two and therefore store more books.

    Had anyone else delved into the most efficient mix of bookshelf spacing?

    Any feedback from Paul on why he went with 15 1/16″? Thanks.

Leave a Reply