Drawer Making episode 1
Posted 6 April 2016
This is an episode in a free series. Want to watch it? It is free to do so, you just need to log into the site, and you can enjoy this video and many other videos we think you will love.
Paul shows the steps used to prepare the stock and fit the drawer to the recess. The drawers feature half-lapped dovetails into the thicker front, and housing dados with tenons at the back. In this episode, Paul demonstrates the first of two different methods for marking out and cutting the half-lapped dovetail joint.
Thanks for the brilliant episode today. I especially liked the section at the beginning with the explanation on getting your pieces precisely square and accurate, a problem many of us face.
Wonderful episode. The guide block for perfectly matched dovetails is an extremely valuable technique. Thank you very much.
You make it look so easy, Paul. Beautiful work. Cannot wait to try this!
Would be interested to know Paul’s reason for not gang cutting dovetails. I do this regularly and it seems to work well. My reasoning is that the longer registration edge helps keep the saw cut square and gang cutting assures uniformity of the drawer sides. Thanks again.
Hi Harold,
Paul discusses it here:
https://paulsellers.com/2014/10/making-the-toolbox-pare-and-chop-dovetails-and-pins/
Best, Phil
That was impressive.
Another great episode, thank you Paul and crew. I am really enjoying this build.
Steve
Love it , love it, love it. Amazingly simple and REPEATABLE.
Thank you Paul and camera crew for bringing this special touch to drawer making.
Beautifully done!!!
When that dove tail went in, it was truly amazing.
I find it very helpful to sit down with a cup of coffee and watch the whole video, then let it sink in over night and watch it again the next day. For me, I will pick up little things I missed, forgot, or whatever. Then I try my hand at it. There is so much to learn not just in knowing what to do, but eye to hand coordination, and even more, knowing what you are seeing. After making one or two dovetails, watch the video again. I always seem to pick up on something more. When I make my first perfect dovetail, you’ll hear a scream of joy from Colombia to England. I’ve got some that are ok, but nothing that would pass your eye.
I do the same.
Me too! What I find interesting is that when I revisit a video it is the subtle softly spoken cues that I missed the first time, which make it seem like I am watching a retake. There is tons of info in each video. Sometimes I feel like when Paul makes a video he is acutely aware of his students making a revisit and those soft spoken and guiding cues are like the hand of skill guiding you to your goal of better than paint quality work.
Thank you for the lesson.
Liked this one a lot. Makes me want to run out into the garage and start making dovetails at 10 PM on a Thursday evening.
Wonderful lesson. Now I know why I was getting the tearout in the middle of my dovetails when using a coping or fret saw to remove waste.
Thank you for taking the time to go through this topic in full detail and with such emphasis on precision. I have been practicing through dovetails and meaning to take on the half-lap. This gives us all a wonderul point of reference for this technique.
Is there any difference in using a tenon saw vs a dovetail saw with the same TPI?
Hi Chris
No there is no real difference , basically a dovetail saw is a tenon saw with a very fine kerf , I think they used to call them Gents saws in days gone by
Since they have different names and different handles, I suspect there is a difference, especially since I’ve seen tenons and dovetails with the same TPI. Maybe Paul can tell us if the angle of the handle is significant.
The terms are pretty subjective really. Tenon saws are usually 12″-16″ long with 11-13 tip. Dovetail saws are usually 6″-12″ long with 12-20 tip. The blade on tenon saws is typically thicker and the set is greater than on a dovetail saw as it’s meant for, generally speaking, heavier work. That said, I’ve cut a zillion dovetails with my favorite 12″ Diston tenon saw.
Gent’s saws are just dovetail saws with a straight handle, as opposed to the more common pistol grip.
just a question but isn’t it possible to square the sides with the shooting board ?
Hello Juryaan,
Do you mean the narrow edge of the sides that Paul is planing up at the beginning? We don’t usually use a shooting board to plane such a long edge. It is also important for developing good planing technique and sensitivity to get used to planing narrow stock by hand.Forgive me if I miss-understand you.
Best,
Phil
Juryann, I agree with you. I shoot the end grain with a shooting board, or just lay my plane on its side on the bench. For the long grain edge, just laying the stock on the bench, elevated a little (usually with its twin piece), and stroke the length with the plane again on its side. Just holding down with hand pressure, maybe butt the end against a stop with the edge peeking out a little. Don’t bother messing about with trying to hold a heavy hunk of metal square to a narrow edge held in a vise. That’s a losing proposition; for me at any rate. L
Whoops, please forgive my misspelling of your name! L
I sooo agree Lee. Using a shooting board here is so much safer and faster. The quality of my saw cuts is pretty good but 3 or 4 passes on the shooter and it’s perfect every time.
As always, amazing.
Thank You to the WWMC team for another series.
Just absolutely beautiful and gentle. Thank you.
Amazing work and even better guidance and instruction. Such a pleasure. Thank you.
Great lesson, Paul. Thank you and all involved in the production.
Nice!
Thank you Paul.
Watching/listening to you gives me back the pleasure in woodworking that my machines had lost for me.
Patiently, thoughtful and deliberate. Why not because this will last for generations to come. Thanks for taking the time to show us.
Mr Sellers you are a magician.Every time I see any of your videos,I pray for you.God bless you
Paul you is a great teacher. Thank you for you transmiting your knowledges. I am a beginner and I am learning with this video.
Jose Acero
One of the key things here is that Paul`s chisels are razor sharp, it makes the whole process so much easier, great tutorial Paul, many thanks.
“…see if something had slipped”. Sounds familiar, I had to build a jig with a lever clamp so I could mark my dovetails because of slippage.
I’ve started a count today in my daily journal to see how many times I watch this. I’ve never cut a blind dovetail but I think I know how now. Thanks.
It’s just incredible watching you cut dovetails and your methods are so great. I’ve have a couple of dovetails under my belt can’t wait to start cutting half blinds. One day I hope to take a class from you it’s on my bucket list. Thank you for sharing.
I am a sixty year old student, who is learning woodwork as a retirement hobby. THANKS Paul for firing my enthusiasm.
I’m in the same position as a 61 year old retiree. It’s awesome being this busy with a task simply for the love of it! Good luck with your work Paul.
That makes me want to head out to the shop at 9 PM on a Sunday night to get right to this task. Beautiful work!
Paul has always been my inspiration to woodworking. From across halfway around the globe 🙂
Great video. This joint has been challenging for me. Especially transferring the tails to the pins using a marking knife.
Seriously great info. Love the wood!
Hi, Paul!
As always, this is an awesome series, as is your books, DVDs, and your passing on the wealth of information you have gained through hard work and perseverance! One question, what kind of hammer are you using to strike your dovetail chisel? Brand, weight, etc. Thank you so much!
Don B!
Hello Don, there is a lot of information available here:
https://paulsellers.com/?s=chisel+hammer
Knocked my socks off. Awesome experience just watching and learning “real woodworking”. Thank You !
Great jig idea and excellent explanations as usual. A joy to watch and inspiring to boot. Thanks
The camera work here was amazing. Seems to get better and better, I.e. Angles and positioning. Made me feel like I was right there looking over Paul’s shoulder as he worked. Outstanding production quality.
I am so impressed with this technique Thank you so much for sharing.
I have cut all for sets of sockets for the half blinds. Despite using the same guage setting for both the length of the tails and the depth of the socket on the end grain, I continue to get a small (approx. 0.5-1 mm) gap between the end of the tail and the socket wall. I would appreciate any insights or tips.
With thanks,
Assuming that all other faces of the joint come together snugly, and that when marking out the fins, the edge of the tail piece is flush with the gauge line of the fin edge, I can only imagine that there is a bevel of the gauge line of the fin edge, resulting in too deep chiselling.
/Sven-Olof
Hi Otto,
I have passed on your question to Paul and he says:
In the video, i’m using a cutting gauge which is also called a slitting gauge and not a marking gauge, this video was about the traditional method used for making half lap dovetails. I assume that you’re using the same type of gauge i am using and not a marking gauge, if that’s the case you have to reverse the blade and reset because the bevel will be on the wrong side when you mark the depth of the tail recesses. If you are following this using this method then there shouldn’t be any problem. Also you could be dealing with compression of the wood, whereby the pressure on the chisel compresses on the fibres and results in the gap you’re speaking of. Usually this gap swells when you apply the glue because the glue is water based. Of course there are no guarantees, this is generally the issue. It doesn’t sounds as though you’re mis-cutting. We have an upcoming series for making drawers for a new project that we have just completed that will be out next Wednesday. If you want to wait to watch that to see the method I now use all the time.
Kind Regards,
Izzy
Thank you.