Reply To: Reply To: Roughing / Scrub Planes

Welcome! Forums General Woodworking Discussions Roughing / Scrub Planes Reply To: Reply To: Roughing / Scrub Planes

#4394
Anonymous
Inactive

Hi Shawn,

#6/#06’s tend to be a little on the large side for roughing/scrubbing work, but by all means use it if you find it works for you. 🙂  It should be fine for occasional use as a scrubber and will serve well for flattening and truing larger stock/panels, but it’s much heavier and wider (With it’s 2-3/8″ blade width) than a typical scrub/roughing plane.