Skip to content

Finished My Joiner's Toolbox!

Welcome! Forums Project Series Joiner’s Toolbox Project Finished My Joiner's Toolbox!

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #128463
    bonius
    Participant

    I made a scaled down version of the Joiner’s Toolbox. It is my first ever woodworking project. I am quite proud of it, despite the sloppy doevtails. It’s 24″ wide, by about 11″ tall and 11″ deep.

    I finished it with two coats of milk paint followed by two coats of Danish Oil.

    Attachments:
    #128468
    David R.
    Participant

    It looks great, especially for a first project. Well done. Keep going.

    from Germany

    #128471
    Orestes
    Participant

    Looking good. The first project is always the hardest. Keep it up

    #128477
    Matt McGrane
    Participant

    You should be pretty darned proud of that. Way to go, and keep them coming.

    Matt, Northern California - Started a blog in 2016: http://tinyshopww.blogspot.com/

    #132544
    operry
    Participant

    Nice work.

    #132550
    Peter George
    Participant

    That’s quite ambitious for a first project. It turned out really well.

    Peter in
    Biggar SK
    "New York is big, but this is Biggar"

    #134054
    bryandmack
    Participant

    Nice work,

    I’m just starting mine. Keep it up, you have a bright future in woodworking!

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.