Joiner toolbox sketchup

Back to: Joiner’s Toolbox Project9 Replies

Welcome! / Forums / Project Series / Joiner’s Toolbox Project / Joiner toolbox sketchup

  • Author
    Posts
  • jude
    26 December 2014 at 9:13 pm #122722

    I made a model of the joiner’s toolbox in Sketchup.

    I can’t upload the file to this site, so here’s a picture. Send me a message if you want a copy of the file.

    The model is to size but does not have details like hinges or dovetails. It should work so that you can see how it looks in 3D before you start.

    Attachments:
    You must be logged in to view attached files.
    jude
    26 December 2014 at 9:14 pm #122724

    Also, here is a picture of the toolbox loaded up with tools. This picture shows the tills removed.

    Thanks to Greg for the detailed drawings that I worked from to make the model.

    Attachments:
    You must be logged in to view attached files.
    António
    27 December 2014 at 3:26 pm #122730

    Very nice work!!

    STEVE MASSIE
    31 January 2015 at 11:42 pm #124167

    I haven’t learned sketch up yet so I find Greg’s nicely detailed drawings welcomed. Thanks Greg !

    Steve

    Greg Merritt
    1 February 2015 at 12:20 am #124169

    @jude nicely done!

    @smassiesr     your most welcome. Very glad you find the drawings useful.

    sodbuster
    27 June 2015 at 8:15 pm #128076

    Well done! I’d love a copy of the skp file if you don’t mind. [email protected]

    mike forbes
    28 June 2015 at 12:25 am #128082

    Love the drawings, love sketchup to get the 360 view.

    jude
    28 June 2015 at 4:37 am #128087

    Mike and John, I emailed you guys a file. You’ll have to move the hinge rail down flush with the wall of the box. I just noticed this after I sent the file.

    jude
    28 June 2015 at 4:39 am #128088

    For anyone interested, I have attached the sketchup file here. I couldn’t do this before.

    Attachments:
    You must be logged in to view attached files.
    Matt McGrane
    28 June 2015 at 7:00 am #128093

    That’s really nice of you, Jude. Thanks a lot.

  • Author
    Posts
  • You must be logged in to reply to this topic.