Old Timber / Lumber

Welcome! › Forums › General Woodworking Discussions › Wood and Wood Preparation › Old Timber / Lumber

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 4 August 2013 at 3:18 pm #16168
    Ken
    Participant

    Found some real old Timber / Lumber amongst the rough sawn boards I got the other day.

    Man It is a nightmare to plane, but I had to have a try HaHa so much for a quiet Sunday. There is 8 small lengths like this, they must have just thrown them in as it was not part of the load I looked at. I have one side flat, and out of twist, I will use it for something 🙂

    Oh I now hate knots full stop. 🙂

    4 August 2013 at 3:42 pm #16170
    lwreinhart
    Participant

    Hi Ken, What type of wood is it?

    4 August 2013 at 3:50 pm #16173
    Ken
    Participant

    Hi Larry, Its old pine board, all the other are not to bad, but these 8 should be put in the bin. It will be great practice though. 🙁 😉

    4 August 2013 at 4:21 pm #16174
    Eddy Flynn
    Participant

    if nothing else Ken it will show you what you should avoid next time haha all practice is good.

    Eddy .. Liverpool, Merseyside, UK
    ,

    4 August 2013 at 4:37 pm #16181
    Ken
    Participant

    HaHa I see why they put them in free of charge. 😉 I will use it though

    4 August 2013 at 4:55 pm #16182
    Mark Armstrong
    Participant

    See your picture Ken just reminded me I have got to sweep shavings up.

    Dagenham, Essex, England

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.