Shooting board
- This topic has 9 replies, 8 voices, and was last updated 9 years, 1 month ago by
.
-
Posts
-
Nearly made a shooting board.
Cheated a bit used MDF for base.
I’m a bit annoyed with my self got to take more time slow down. I jumped out of the Knife wall and marked wood. Also bottom housing/dado not as nice as I would have liked. Grain going different directions one housing/dado had two knots in it.
Post a picture soon.
Dagenham, Essex, England
Finished not turned out to bad, hope it works 😮
Dagenham, Essex, England
Test Mitre very happy 🙂
Dagenham, Essex, England
Looks good Mark, nice job!!
Memphis, Tennessee
Good Job Mark!
Musician and wood lover (Girona-Catalonia)
Nice job Mark, miter looks great.
Lopik - Netherlands
Wow, those knots are were right in the middle of the lower housing. It looks great!
Finally got around to making one. The lower 45° angle still needs to be cut, but this should suffice for making christmas stars. I used what pieces of wood I could find, so the dimensions differ a bit from the ones @paul-sellers used.
David
from Germany
Looking good David. You will be surprised how much you use it.
http://hillbillydaiku.com
You will find it very handy David. I know Paul generally planes his end grain in a vice but I like to use the shooting board with a number 4 1/2 plane
Wigan, Lancs. England :
- You must be logged in to reply to this topic.