Vertical Grain Douglas Fir Cabinet Build – Part 1

Welcome! Forums General Woodworking Discussions Woodworking Videos Vertical Grain Douglas Fir Cabinet Build – Part 1

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts
  • #21687
    MartyBacke
    Participant

    This is my first video where I make use of the techniques that Paul has been teaching us. It’s not a teaching video (Paul handles that just fine), but a showcase for hand tool use (there is about 15 seconds of a table saw at the beginning).

    http://youtu.be/IEWHRMdSe9s

    I think Paul would be happy with my dovetail work πŸ™‚

    P.s. Ken, if you happen to see this maybe you can give me a clue on how you embed a Youtube video here. As much as I tried, nothing worked. You seem to have it down. Thanks in advance.

    #21691
    Greg Merritt
    Participant

    http://hillbillydaiku.com

    #21693
    Greg Merritt
    Participant

    Well done Marty. Look forward to the next installment.
    Just copy and past the youtube address.

    http://hillbillydaiku.com

    #21694
    MartyBacke
    Participant

    Thanks Greg, for posting my video πŸ™‚

    Still not sure what’s going on. I copied and pasted the embedded code from Youtube, but it would just show up as ‘pasted text’ in the page. I’ve got another video, so I’ll try again in a day or so.

    #21695
    Ken
    Participant

    Marty copy the video URL or copy and past the the address from the browser

    #21697
    MartyBacke
    Participant

    Thanks Ken (and Greg). I just tried with a new video and it worked fine.

    I was trying to be too smart, and was posting the embed code from Youtube. Guess this site’s software knows about Youtube and automagically adds the appropriate code.

    Thanks again.

    #22027
    DeniseG
    Participant

    Hi Marty,

    I loved the video. Nice work on the project and the video. What plow or rabbit plane are you using (the blue one)? And do you like it. I’m in the market for one.

    i'd prefer to make it myself

    #22038
    MartyBacke
    Participant

    Thanks Denise.

    The rabbet plane is a Record #778 () that I bought ~20 years ago. I like it, and it works well. Unfortunately they stopped making it about 10 years ago.

    If I had to buy a new rabbet plane today, I’m pretty sure I’d buy the Veritas version.

    #22066
    Mark Armstrong
    Participant

    Marty Great job you are a lot braver than me to make a video well done.
    I have some of those Marples chisels. They have a fine bevel on them great for Dovetails.
    Also looks like you have a good set of tools green with envy.
    I eagerly wait for the next episode, πŸ˜‰

    Dagenham, Essex, England

    #22073
    Eddy Flynn
    Participant

    well done Marty nice way of showning your shop the bathroom, cabinet looks like its coming on great (didnt realise ive been subsribed to your youtube channel for a while small world eh)

    Eddy .. Liverpool, Merseyside, UK
    ,

    #22103
    MartyBacke
    Participant

    Thanks Eddy. It is a small world, so it seems sometimes.

    #22104
    MartyBacke
    Participant

    Hi Mark,

    Those Marples chisels are really nice. I bought my set probably 20 years ago, when they were still made in England.

    #22105
    Steve Follis
    Participant

    I watched this the other day, and I just realized that it is your video Marty. Congratulations! I enjoyed watching it, I’m ready to see part 2.

    Memphis, Tennessee

    #22174
    Magnus
    Participant

    Very nice Marty, thanks for sharing!

    /Magnus

    #23152
    kelly
    Participant

    Hey Marty,

    The project and the video both look great. Good job.

    I’m curious … how is that clamp secured (mounted) to the bench? I use mine like that but, I usually have an “F Clamp” or a holdfast securing it to the bench top.

    BTW, where’s part 2? πŸ™‚

    Texas, USA

Viewing 15 posts - 1 through 15 (of 16 total)
  • You must be logged in to reply to this topic.