Forum Replies Created
-
AuthorPosts
-
8 October 2017 at 1:35 am #330533
Hi Harvey
Thanks for that I should of made it clear I’m in the UK so that may make a difference to what’s available7 October 2017 at 11:46 pm #330501If I remember rightly Paul did say he was going to do a piece on setting a bandsaw up he is welcome to our workshop any day to demonstrate
7 October 2017 at 11:07 pm #330485I did look at the Axminster blades but wanted more info before i buy
29 July 2017 at 5:11 pm #314136Hi Matt i started out with these
http://www.ebay.co.uk/itm/4-x-600mm-ALUMINIUM-SASH-CLAMP-bench-cramp-glue-wood-door-vice-vc62-/231977961917?hash=item3602f6c9bd:g:ZbMAAOSwNNxWFCTo29 July 2017 at 4:54 pm #314135even a cheap oil stone and honing guide will bring it back to square in no time, if you are going off line from side to side i would recommend using a mortise guide as demonstrated by Paul in some of his videos
30 November 2016 at 5:41 pm #142802there does seem to be some issues with the plane ie the screws on the tote have been replaced and the lever cap also looks like it’s a replacement and broke (I’d replace that) , saying that if you follow Paul’s video on restoration you should be able to have a usable plane and the restoration will give you experience on assembly and using.
- This reply was modified 7 years, 4 months ago by Eddy Flynn.
24 October 2016 at 11:59 pm #141883just flip the stones over they should have the grit written on the back in black ink
20 October 2016 at 1:01 am #141666@allenpadilla practice practice practice and enjoy the journey, i remember a story Paul told about the months he spent making ledged and braced gates during his apprenticeship (and now how he could make one blindfold) repetition is key to building skill and speed.
20 October 2016 at 12:36 am #141661@gregjkm the build looks fantastic is that walnut you’re using, looking at your workbench it looks like it’s set up for a left handed user do you have any issues being show everything right handed,the reason i ask one of our shed members has asked for a left handed bench ,
4 October 2016 at 8:09 pm #141171that’s a great collection you will have a fantastic time getting these tools back into working condition not to mention the enjoyment of working wood with the tools your father gave you.
29 September 2016 at 2:46 pm #141045How many of you have made one of these https://www.youtube.com/watch?v=sw1JGEbKgCw
-
AuthorPosts