tompslattery

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 44 total)
  • Author
    Posts
  • #330916
    tompslattery
    Participant

    @ziehl

    From memory it’s the exact dimensions from the video. I had difficulty getting the lid level so I ended up with less room under the lid. My planes have to lie on their side

    #313724
    tompslattery
    Participant

    https://www.goodsandchattels.com

    I got mine from here

    #134820
    tompslattery
    Participant

    Oh dear auto correct is having a field day

    #134819
    tompslattery
    Participant

    Storage space for isn’t was it was supposed to say

    #134818
    tompslattery
    Participant

    Hi

    I live not far from you at Ferny hills. I’ve purchased timber from lazarides previously but they announced a little while ago that they were only going to deal in wholesale amounts which is certainly more than I can afford/need/have storage space from.

    #134496
    tompslattery
    Participant

    Tasmanian oak

    #132879
    tompslattery
    Participant

    Yep embarrassingly just wasn’t sharp enough

    #132842
    tompslattery
    Participant

    I’ve experimented with having the front in different positions.

    Perhaps it’s just not sharp enough?

    #132793
    tompslattery
    Participant

    And little bit of cedar I’ve got sitting under my bench makes it smell like a sauna too

    #132792
    tompslattery
    Participant

    Brisbane

    #132788
    tompslattery
    Participant

    Nice site.

    I agree with you on the heat. I work in the garage below the house and it was like a sauna down there yesterday afternoon. Queensland weather at its finest

    #132023
    tompslattery
    Participant

    Thanks for that. Mainly looking for timber for the projects on here. Part of the way through on the tool chest

    #131895
    tompslattery
    Participant

    I have a look at bootle. I’d spoken to brittons previously and I didn’t get a wholesale amount they wanted to charge an extra $60.

    Thanks 🙂

    #131748
    tompslattery
    Participant

    But both sides a pretty flush with the front. So I did that one right

    #131740
    tompslattery
    Participant

    A combination of some inattentive planing and some other error that I don’t know what it is. The sides ended up being not as wide as the back. But I knew that. So I lined up the sides with the bottom of the back when marking the pins so I could plane off the extra at the top. But one side ended up being closer to flush with the bottom and the other side ended up being closer to the top

Viewing 15 posts - 1 through 15 (of 44 total)