Reply To: Tung Oil Paste Wax issues
Welcome! / Forums / General Woodworking Discussions / Finishing / Tung Oil Paste Wax issues / Reply To: Tung Oil Paste Wax issues
The white is likely the wax/oil that didn’t penetrate completely. Tung oil is fine to use for this application-just be aware it dries very slowly and wait at least a day or 2 between coats. 3-5 days would be even better. Penetration of the oil/wax blend is enhanced by a solvent-traditionally spirits of turpentine, more recently odorless mineral spirits have been used, but the new “citrus solvent” works well too, and smells a lot better. Wipe on heavily, rub in vigorously, wipe off completely and then buff with a clean rag after the wax has hardened. Temperature makes a great difference when using wax, in terms of penetration. Use high quality products but I think you will be happy with the finish-enhances the grain and gives great depth, but does not form a surface film, giving a very “natural” feel.