Reply To: Vise fitting gone wrong, help needed
Welcome! / Forums / General Woodworking Discussions / Woodworking Methods and Techniques / Vise fitting gone wrong, help needed / Reply To: Vise fitting gone wrong, help needed
Matthew,
Second approach would be to remove the vise, use a chisel or gouge to excavate around the screw shaft to allow a pair of locking pliers to grip the shaft and back the screw out.
You can then drill out a hole large enough to cover the gouged area and glue in an appropriate sized dowel or plug. And start over. ( predrill and lots of wax)
Best,
Craig