Reply To: Project Breadboard
Welcome! / Forums / Project Series / Breadboard-end Cutting Board / Project Breadboard / Reply To: Project Breadboard
18 August 2013 at 7:10 pm
#16689
Making the oak pegs:
To get the oak pegs to size 8mm I used old heavy duty door hinge I had. I opened up 4 of the screw holes to 8mm, 8.6mm,9,5mm and 10mm, I found that if I started by knocking the pegs through the 10mm hole then progress down till they had all been though the 8mm hole I could get away with minimum planing of the pegs.