Reply To: Screwed linseed finish
Welcome! / Forums / General Woodworking Discussions / Finishing / Screwed linseed finish / Reply To: Screwed linseed finish
Re: Formby’s Refinisher
Cautions:
DANGER! POISON. EXTREMELY FLAMMABLE – VAPORS MAY CAUSE FLASH FIRES! VAPOR HARMFUL. IRRITATES EYES, SKIN AND RESPIRATORY TRACT. CAN BE ABSORBED THROUGH THE SKIN. MAY CAUSE EYE DAMAGE. MAY BE FATAL OR CAUSE BLINDNESS IF SWALLOWED.
CONTENTS ARE EXTREMELY FLAMMABLE. Keep away from heat, sparks, and open flame. Vapors will accumulate readily and may ignite explosively. During use and until all vapors are gone: Keep area ventilated – Do not smoke – Extinguish all flames, pilot lights and heaters – Turn off stoves, electric tools and appliances, and any other sources of ignition.
VAPOR HARMFUL. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area.
CANNOT BE MADE NON-POISONOUS. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.
FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, do not induce vomiting. Get medical attention immediately.
Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.
Above is from their site.
The solvents from the MSDS are: Acetone, Toluene and Methanol.
Hope this helps.
Craig