Coffee Table Gallery

Coffee table, different design

Coffee Table 3D AutoCAD Model

19x21x40 oak finished 4 coats of light amber dewaxed shellac,top 3 coats of clear water based satin varnish and coat of clear paste wax

3D MODEL

Coffee Table by Jonathan Wright-DrawnWright

Quilted Maple Coffee Table

First big project! Coffee table in sycamore, supplied by Lanarkshire Hardwoods. Started before Christmas and just completed! Had to redo the magazine rack due to measuring without clamping the parts together … a lesson! Thanks Mr Sellers .. you have been my constant companion throughout.

Oak piece with dovetailed drawers, modified PS ‘toolbox’ handles with sapele accent. Finished wirh shellac with water based poly on top, wax

Coffee Table in Pine

Red/White Oak Coffee Table

Coffe table in oak. Finished with aniline water walnut and shellac.

Rustic Cedar & Cypress Coffee Table. The base was made from a 3 foot off-cut from an 8″x8″ cedar post that had been weathered for about two years. I sawed it on my sawmill to the final dimensions trying to keep the sawmarks and all. The legs are 3″ square and the aprons are 3″x 3/4″. The top is Cypress from a log I milled about 5 years ago with a center piece of walnut running down the middle. Overall size is 39 1/2″ square x 18″ high, with a waterlox finish on the top and the base is walnut and stain and wax only.