Reply To: Band Saw
…be able to resaw thicker boards. Example 1HP http://www.grizzly.com/products/14-Deluxe-Bandsaw-Anniversary-Edition/G0555LANV has a 6″ cutting height and the 2HP I bought has a 12″ cutting height. Of course, it cost me almost…
…be able to resaw thicker boards. Example 1HP http://www.grizzly.com/products/14-Deluxe-Bandsaw-Anniversary-Edition/G0555LANV has a 6″ cutting height and the 2HP I bought has a 12″ cutting height. Of course, it cost me almost…
…you say 4″ either side of the router, but Paul mentioned 1″. Personally, I was looking at 1 1/2″ either side. I’m off to research phenolic plywood Thank you Sven…
…http://paulsellers.com/2011/05/know-your-wood-1/ I can only find #1,2,3,4,5 and 27. Are there supposed to be more (i.e. from #6 to #26)?? I cannot find them using search (on google either) thx nicolae…
Thanks Dave. I did read about board feet when I searched the topic and realised it was specific to Canada and U.S. So the principles are the same though. You…
I’m not sure where you are taking this. Try YouTube and type in Hewing at the search prompt. For the axe I think this is probably a status thing. If…
After a bit of research, the attached pic displays the best set up for cold roof insulation installation. The question now, is what do I need to do to prevent…
…easy to confuse. 10-24 is still a universal size for electronic racks and such( and lamp parts in the USA.) Looking on eBay.uk and searching “10-24 thumbscrew” there are several…
Dave- Thanks for the reply. I searched a bit and found a number of people saying they used paste wax for everything on the vise and, since it seemed Paul…
I have searched through the topics and can find similar but not quiet the same question as this one! I really struggle to plane square!!!! I have lots of (now…
…by Christopher Tribe, not Tripe. I’m not sure links will embed in this post properly but I found the video in question by searching for [christopher tribe plane] on youtube….