Reply To: end grain groove on table top edge.
[quote quote=786212]i was expecting to plow ‘from both side’[/quote] My inclination is to always work from a single reference surface or edge whenever possible. There is almost always a small…
[quote quote=786212]i was expecting to plow ‘from both side’[/quote] My inclination is to always work from a single reference surface or edge whenever possible. There is almost always a small…
I spent a fair bit of my career doing something called lifecycle analysis, which is a method to assess and compare the environmental consequences of various processes. To explain, let’s…
…a very complicated mechanical saw filer so you can sharpen the saw you just made. Heheh… — Four years ago I came into WW thinking that I would get all…
…of “handtooling”. Highland Woodworking sells a complete set with metric measurements, and have recently come out with a new line of Premium Bevel Edge chisels, all at a very reasonable…
I placed the smooth side up on mine and have similar problems that you’ve described, just seems to be the nature of the compound. I chose to not remake it….
Just spent about 2 to 3 hours truing up my workbench aprons. Enjoyed. Funny thing though, when I used my combi square (which is now square due to the handy…
…and tearing are common complaints when working with construction grade lumber. Common causes are your chisel is not sharp enough, your trying to take too much wood with each pass…
The white is likely the wax/oil that didn’t penetrate completely. Tung oil is fine to use for this application-just be aware it dries very slowly and wait at least a…
…fine tune it. It’s been working wonderfully since. Granted, they do cater to the power tool community. They also push their own brand (Woodriver). I guess our area must have…
…read and watched! I’m just going to have to buy some and try it out. Not videos, but here’s some more paint instruction from Greg and Paul: https://woodworkingmasterclasses.com/discussions/reply/reply-to-handyman-tool-box-build-18/ http://paulsellers.com/2012/08/questions-answered-painting-my-projects/ George….