Reply To: Bench Stool Progress
Denise…thanks. The foam board should work just fine. I used a sheet of ply just to see how it was. I’ll save that piece of ply and use it as…
Denise…thanks. The foam board should work just fine. I used a sheet of ply just to see how it was. I’ll save that piece of ply and use it as…
…if you screw a strong board to each of the vise faces, with the top of these boards level with the bench top. If these boards are pine, the pressure…
Hi Ken What was the size of the boards?…
It looks like a flat sawn piece and the full width of the log. You have several cathedrals, lots of reversing grain, particularly down the center of the board. You’ve…
…As for knife technique, it is most important to avoid allowing the blade to turn into the edge of the board being used as a straight edge and to make…
…planing snipe 8″ or 9″ from one end, probably because the planing operator didn’t have the patience to wait until the board naturally fed through the machine and yanked the…