Reply To: Working Accoya with hand tools
…should probably be a marine grade like 316. I’m not sure if the more common 304 Is good enough in a wet environment due to the treatment. . The accoya…
…should probably be a marine grade like 316. I’m not sure if the more common 304 Is good enough in a wet environment due to the treatment. . The accoya…
Would you believe this is just a little something I put together? I wish π https://mymodernmet.com/studley-tool-chest/ see also https://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/a-look-at-the-seaton-tool-chest Modern trends seem to favor custom-cut foam: http://lumberjocks.com/projects/155538 (documented here: https://www.youtube.com/watch?v=CKntxbWe63U)…
…Veritas router was the ability to configure it as both closed and open (or bullnose, as they describe it) throat, and even “laterally” if that is your thing. With Lie-Nielsen,…
Hi, I’m about to build my first workbench at home, and I also would like to build a similar open shelf system that Paul uses, and that’s behind his workbench….
…at the expense of homeowners. So I was asked to submit a drawing for approval on a window that I can’t open and has rotten really badly making accurate measurements…
…sure about the open time as I have only used it on small projects. I think I would go for Titebond Extend super strong with a longer open time ….
[quote quote=5434]Have some of you had any experience with Elmers glue? I am looking for a strong glue with some open time for clamping. [/quote] Juryaan, elmers is good glue….
…letting the dog fully engage on the drive screw? Is the QR lever easier to move when the vise is only 4″ open (rather than fully open), i.e. not under…
…is closed, i.e., open in angle, not just the bit of gap that’s comes from the pin. The idea is to leave clearance for the screw heads which, for him,…
@crance [quote quote=6855]I really like the way yours would open out on the top and swing back[/quote] Thanks, the doors on the top were the main idea I started with….