Reply To: Wood Craft (store) and the Joke i think it is.
…fine tune it. It’s been working wonderfully since. Granted, they do cater to the power tool community. They also push their own brand (Woodriver). I guess our area must have…
…fine tune it. It’s been working wonderfully since. Granted, they do cater to the power tool community. They also push their own brand (Woodriver). I guess our area must have…
…Make sure you have either the latest version of Flash (http://get.adobe.com/flashplayer/) running on your computer Switch to another browser to see if that helps. I hope something there will help….
…read and watched! I’m just going to have to buy some and try it out. Not videos, but here’s some more paint instruction from Greg and Paul: https://woodworkingmasterclasses.com/discussions/reply/reply-to-handyman-tool-box-build-18/ http://paulsellers.com/2012/08/questions-answered-painting-my-projects/ George….
Maybe try roughening the leather with a bit of sandpaper? Have you tried using less compound? I put a really small amount on, use it till it seems it’s not…
…is quite a chunky bit of kit on a board so really only comes out for flattening, same as the scary sharp set up a bit bulky and plus you…
…using the link in the footer of any email or through your account settings. Please email me direct marketing communications (information, offers and opportunities from your company that may be…
After making my first rocking chair project I read about compass planes and thought that if the opportunity arose that I might find them useful for the curved rockers and…
…handy. Here’s one thing I discovered today. I have a strop (store-bought leather strip on an oak board) that I charge with the green honing compound. Today I REALLY charged…
@awesomeopossum74, no I live in Berkshire UK and the hygometer in the workshop is quite acurrate. VCI stands for Volatile Corrosion Inhibitor. It’s a compound that is supposed to prevent…
From a practical standpoint alone, it was common to mark the dovetails using the saw i the kerf of the tails before removing the waste from the pine recesses either…