Reply To: Wood purchasing – Hull Humberside East Yorkshire
…me (Reading), only compromises. I’m also interested in any good answers here. In my experience, B&Q wood is good for almost nothing except learning how to foursquare it again. As…
…me (Reading), only compromises. I’m also interested in any good answers here. In my experience, B&Q wood is good for almost nothing except learning how to foursquare it again. As…
…& the A numbers are guesstimates of the corresponding ANSI grades using the http://www.washingtonmills.com/guides/grit-sizes-ansi/particle-size-conversion-chart-ansi/ table. Here in the Land of OZ we use the European FEPA P scale for sandpaper…
…way, this will take time and it will be exhausting, but you don’t need to finish it in one go. Only make sure, you are working the complete surface in…
…scale a billiard ball up to the size of the earth, the earth would be smoother…. it’s all about scale, or in our case if you mean flat, or smooth……..
…north America but the type of chair is expensive and hard to find here. It’s very comfortable, my wife loves it and I had a great time making it, learning…
…remember sound is measured on a log scale. There are sound clips you can use for the First layer instead of channel, but I’ve never used them, so I can’t…
…unit. Using a still frame I took measurements to put them into ratio form for scaling. Below is a picture of what I measured. All measurements were approximate. [attachment file=461888]…
…scarring from where the high carbon steel has been forge welded onto the low carbon steel and they have been unable to fully remove the scarring by grinding the iron…
…stable. Do any readers know of anywhere in my local or perhaps does anyone have any thoughts on using recycled scaffold boards for the Apron and well board? Cheers Neil…
…drawing, mark the inch end on to the template. Much quicker. I am curious if anyone has any other methods they use for transferring and scaling at the same time?…