Reply To: Emilio – Workbench project – Aprons
Welcome! / Forums / General Woodworking Discussions / Projects / Emilio – Workbench project – Aprons / Reply To: Emilio – Workbench project – Aprons
David, you’re right. My workbench is a bit… more “light”. 🙂
Legs are 70mm X 70mm [X 900mm].
Top and bottom cross rails are ~35mm X ~100mm [X ~830mm (top rails) || ~860mm (bottom rails)]. Tenons are 12mm thick (~35mm/3)
Aprons are 30mm X 400mm [X 1500mm]. Housing dadoes are 12mm deep.
And each of the two laminated tops is made with 4 @ 70mm X 70mm [X 1500mm].
Well, I hope my workbench will be stable enough… I will let you know for sure! 🙂
P.S. I think I’ll have to install a little vise – the thickness of the bench top is only 70mm (http://www.fine-tools.com/schraub.htm – Woodworking Vise Type 52); or to make my own vise (I’d use something like http://www.axminster.co.uk/york-plain-screw-vice-guide). Don’t know yet…