Reply To: 100mm Screws
Welcome! / Forums / General Woodworking Discussions / Tools and Tool Maintenance/Restoration / 100mm Screws / Reply To: 100mm Screws
Hi Larry
Thanks for the links.
Are they the same as the two possible candidates I posted above? They look to be:
6.7mm diameter x 100mm length at £12.99
http://www.screwfix.com/p/timbascrew-flange-timber-screws-gold-6-7-x-100mm-50-pack/3374j
6.3mm diameter x 100mm length at £19.99 (smaller diameter but more expensive?)
http://www.screwfix.com/p/timberfix-flange-structural-timber-screw-brown-6-3-x-100mm-50-pack/23059
The screws you posted, are thicker (if 3/8 = 9.5mm – which would be even better).
I have attached a pic of the problem I have. You’ll have to forgive my poor drawing skills but the point I am trying to get across is there is not enough apron for the coach bolt to go through. As indicated by the red circle, some of the coach bolt’s thread (more than what is displayed) would miss the bottom of the apron. I made my benchtop an inch or so thicker, and this is what I think has caused the issue.