Reply To: Finished Box
Welcome! / Forums / Project Series / Dovetail Boxes / Finished Box / Reply To: Finished Box
@Ken: Thanks mate, I have to watch it on my computer because it doesn’t show here.
@Jeff: I tried out several things today. I began with mounting the record 44 onto a piece of wood 2×3 with the blade fixed to the front of the wood and not in the plane and it worked but only for a little while because then the blade went loose and I had to think it over. Than I decided to imitate the poor man’s router and that worked very well. The only problem with that was that you decide on the distance from the edge the moment you drill the hole. For the body I took a 2x3x7 wood and sawed a shoulder at about half of the length an half the thickness (like a half-lap). This provides a fence that runs pretty well along the board that is to be grooved.
I will try to post some pictures later on. I like to experiment first and if it doesn’t work I start the research 🙂
Florian