Welcome! Forums General Woodworking Discussions Projects Bathroom Shelves in Maple

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #141230
    Matt McGrane
    Participant

    We had a small remodel done to our second bathroom and needed a wall cabinet. The cabinet under the sink is maple, so I used maple to match. We discussed a few design options and settled on this. It’s put together with dado and rabbet joints, held together with only glue. The top is 3/4″ thick and all other parts are 17/32″. It’s finished with three coats of polyurethane, lightly sanding between coats, and then a coat of paste wax.

    Firsts in this project: making a molding profile on the edges of the top.

    I blogged about this build, if anybody is interested to read more. The blog site is in my signature line – look for the entries entitled “A Bathroom Cabinet”, parts 1, 2 and 3.

    Matt, Northern California - Started a blog in 2016: http://tinyshopww.blogspot.com/

    Attachments:
    #141236

    Very nice Matt. Functional and well designed.

    Located in Honeoye Falls NY USA. The Finger Lakes region of Western NY.

    "If you give me 6 hours to fell a tree, I will take the first 4 to sharpen my axe" Abe Lincoln

    #141810
    Richard Guggemos
    Participant

    Matt,
    Very well done! The starfish add a nice whimsical feel, and your molding turned out well.
    Rick G

    #141840
    Matt McGrane
    Participant

    Thanks Rick. My wife had the idea for the starfish – she’s much better at decorative things than I am.

    Matt, Northern California - Started a blog in 2016: http://tinyshopww.blogspot.com/

    #141849
    Sandy
    Participant

    Looks good Matt. I love the simple look. You did a great job and maple is not always easy to work with.

    Insanity: doing the same thing over and over again and expecting different results.

    Albert Einstein

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.