Donkey ear shooting board

Welcome! Forums General Woodworking Discussions Donkey ear shooting board

  • This topic has 17 replies, 6 voices, and was last updated 10 years ago by Anonymous.
Viewing 15 posts - 1 through 15 (of 18 total)
  • Author
    Posts
  • #3553
    Dave
    Participant

    Does anybody have plans for a donkey ear shooting board?  To mitre the end of a board?  I made the board in Pauls video and it works great but I’d like to be able to mitre the end of boards too.  I’ve looked all over and can’t seem to locate one.

    -Canada

    #3555
    Ron Harper
    Participant
    #3565
    Anonymous
    Inactive

    Hi Dave,

    The shooting board Ron linked to is a decent one, but I can draw a set of Sketchup plans for another type if you wish. 🙂

    #3580
    Joseph Sellers
    Keymaster

    Hi @dave,

    I do not know of any plans. Thanks @gazpal for the offer of a Sketchup drawing.

    Paul did an article a while back on shooting boards and there are a couple of drawings of them that you may want to have a look at.

    You can see the article here: http://www.popularwoodworking.com/wp-content/uploads/2010/11/ShootingBoard2.pdf

    Paul may have more detailed drawings. I will ask him.

    #3606
    Anonymous
    Inactive

    Thanks for the link Joseph

    #3629
    Anonymous
    Inactive

    I think Paul’s article truly covers much of what can be said on the topic 🙂

    Never a problem regarding Sketchup plans Joseph 🙂  I’m free most of the time and can swiftly draw something up whenever needed

    #3634
    Dave
    Participant

    Thanks for the offer Gary, a sketchup plan would be great and very appreciated.

    Joseph, thanks for the link, that gives me some ideas on building one.

    -Canada

    #3677
    Anonymous
    Inactive

    Hi Dave,

    I’ll draw a Sketchup plan tonight and hope to have it ready to send by morning as I’ve a busy day tomorrow at hospital with my middle daughter. 🙂

    #3685
    Dave
    Participant

    Hi Gary,

    Thanks! Much appreciated.

    -Canada

    #3709
    Anonymous
    Inactive

    You’re very welcome Dave 🙂  I’m unfortunately having problems trying to post Sketchup drawings on here, but I can always email a copy to you if you wish.

     

    #3730
    Anonymous
    Inactive

    Hi Dave,

    I’ve sent a copy of the drawing and hope it’s the design type you were seeking. 🙂

    #3745
    Charles Cleland
    Participant

    Gary,

    Could you perhaps post a link for the rest of us?  This project interests me as well.

     

    -Andy

    Washington State, USA
    My own humble blog:
    http://toolsofourfathers.wordpress.com/

    #3747
    Anonymous
    Inactive

    Charles, till Gary is able to post Sketchup on the forum, you would be better off sending him a massage buddy.

    #3753
    Anonymous
    Inactive

    Hi Charles,

    I’ll post drawings here as soon as I can, but shoot me a PM and I can always forward a copy via email if you’d like. 🙂

    Not too sure about being sent massages though Ken 😀

    #3754
    Anonymous
    Inactive

    Not too sure about being sent massages though Ken.

    Then why ask people to PM you buddy 😉

Viewing 15 posts - 1 through 15 (of 18 total)
  • You must be logged in to reply to this topic.