Dovetail Boxes Reference Sheets

Welcome! › Forums › Project Series › Dovetail Boxes › Dovetail Boxes Reference Sheets

Viewing 15 posts - 1 through 15 (of 19 total)
1 2
  • Author
    Posts
  • 29 November 2013 at 3:28 pm #22627
    Greg Merritt
    Participant

    Per the series…

    http://hillbillydaiku.com

    29 November 2013 at 3:32 pm #22631
    Ken
    Participant

    HaHa even better thanks Greg, nice job 😉

    29 November 2013 at 3:52 pm #22634
    rbh
    Participant

    Greg, thank you for adding your notebook pages. Very easy to follow. Thanks for sharing!

    Cheers,
    Rob

    29 November 2013 at 3:56 pm #22636
    Greg Merritt
    Participant

    Thanks Ken and your most welcome Rob.

    http://hillbillydaiku.com

    9 December 2013 at 4:23 am #23353
    Eric Kimes
    Participant

    Wow! Thank you for posting your drawings. I really appreciate it.

    9 December 2013 at 5:45 am #23354
    Greg Merritt
    Participant

    Your most welcome Eric.

    http://hillbillydaiku.com

    9 December 2013 at 7:05 am #23360
    David Gill
    Participant

    Hi Greg
    Thanks for that they make such handy reference documents

    Wigan, Lancs. England :

    11 December 2013 at 12:13 pm #23621
    Brett aka Pheasantww
    Participant

    Greg, I really appreciate your drawings. I think you need to make a video on how you make your drawings…..

    Located in Honeoye Falls NY USA. The Finger Lakes region of Western NY.

    "If you give me 6 hours to fell a tree, I will take the first 4 to sharpen my axe" Abe Lincoln

    11 December 2013 at 12:50 pm #23626
    Mick Mercer
    Participant

    Greg, wonderful drawings and very generous to share them. Much appreciated.

    Mick

    14 December 2013 at 1:00 pm #23857
    Don Slawski
    Participant

    Excellent sketches Greg. I’m envious of your talent! Thanks for sharing.

    Don

    14 December 2013 at 4:36 pm #23859
    Greg Merritt
    Participant

    Your welcome everyone. Glad you find them of use.

    http://hillbillydaiku.com

    15 December 2013 at 6:59 pm #23935
    Sandy
    Participant

    Greg, Unless I am reading your sketch wrong I think there is an error on the third drawing of the pencil box with the lid. Take a look and tell me.. The sketch in the lower left corner is showing both ends of the sides?

    Insanity: doing the same thing over and over again and expecting different results.

    Albert Einstein

    15 December 2013 at 9:33 pm #23946
    Greg Merritt
    Participant

    Sandy you are correct! I will fix it and repost as soon as I can. Thanks for catching the error.

    http://hillbillydaiku.com

    15 December 2013 at 11:46 pm #23951
    Sandy
    Participant

    Greg,
    I wish I had but my pencil box caught it… 🙂 I made one today using just hand tools. It was great! If I had to make a bunch of them I’d probably go back to the table saw but getting it square was fun… I looked up and it was dark outside… My wife had hobbled out and fed the horses. (she has a broken ankle). But when I handed her the box she hugged my neck! I’m liking this stuff more every day.

    The hardest thing to get the hang of is not breaking the ends of when planning end grain.

    Insanity: doing the same thing over and over again and expecting different results.

    Albert Einstein

    16 December 2013 at 1:21 am #23957
    Greg Merritt
    Participant

    It has been brought to my attention that the drawing I posted for the dovetail box with sliding lid contained an error. I have corrected the error and I am posting it here.

    Please destroy any copy that you have of the original and replace it with this revised drawing.

    Also, please accept my apologies for any trouble the error may have caused you. I do my best to vet these drawings before I post them but I make mistakes. I really am sorry for the error.

    Greg

    http://hillbillydaiku.com

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 19 total)
1 2
  • You must be logged in to reply to this topic.