Just got some Ally sash cramps
- This topic has 5 replies, 6 voices, and was last updated 8 years ago by
.
-
Posts
-
Got 6 @ 600 mm and 4 @ 1200 mm
Just glued some ply pads to cramps
Nice and light and with the quick release easier to set up.
Should be strong enough for my projects.
If it comes to it I have T bar sash cramps from 2 ft to 7 ft theses things can really cramp up.Dagenham, Essex, England
Nice one, where did you purchased it?
grrets frank
If anyone in the USA is looking for something similar, I have picked up very similar clamps at Harbor Freight. They are sold under the “Pittsburgh” brand. A 24″ clamp can be had for under $10
http://www.harborfreight.com/catalogsearch/result?q=aluminum+bar+clamp
Seattle, WA
I bought the same ones off ebay I think they were £35 for 4 inc delivery
Nice one, where did you purchased it?
grrets frank
Hi @frankman111 – I bought a bunch of these silverline clamps from amazon.co.uk: http://www.amazon.co.uk/Silverline-VC64-Aluminium-Clamp-1200mm/dp/B000LFVHQA/ref=sr_1_21?s=diy&ie=UTF8&qid=1422482790&sr=1-21&keywords=clamps
They are fairly cheap and work well. I notice that Paul uses similar ones (although they are not silverline brand, but look the same) but he has put a length of wood down the middle of the aluminium body – for extra rigidity I assume.
Chris - Exeter, UK
I purchased several from tool-net.co.uk who seem to be the cheapest out there if you’re buying more than a few.
- You must be logged in to reply to this topic.
