pauls chisel hammer
Welcome! / Forums / General Woodworking Discussions / Tools and Tool Maintenance/Restoration / pauls chisel hammer
- This topic has 10 replies, 9 voices, and was last updated 11 years ago by Mark Seay.
-
AuthorPosts
-
3 April 2013 at 7:02 pm #10452
i am about to buy pauls chisel hammer and wanted to know should i get spare faces or if the one that comes will last a long time. they are like 2.50 each so they dont cost a lot
3 April 2013 at 10:10 pm #10457I have been looking for that hammer and have not found it. I did find the Stanley knife and I like it very much.
Steve
4 April 2013 at 6:01 pm #10486Here is another link that Paul had previously give on his blog for the Thorex Hammer in the US.
http://www.vaughanmfg.com/shopping/Products/1-12-Nylon-Face-Hammer__NT150.aspx
5 April 2013 at 11:46 am #10516Looks like a Thor hammer. I use one to bash office desking together in my work.
Just of late I have been using carvers mallet.
10 April 2013 at 10:37 pm #10739For anyone in the UK, this was the cheapest place I found with free postage when I last looked, and is the one Paul now uses at the workshop most of the time:
http://www.my-tool-shed.co.uk/p8004/Thor_712R_Soft_&_Hard_Faced_Hammer_38mm_650g/product_info.html
10 April 2013 at 11:44 pm #10744I already have the smaller version. Decided to get 38 mm with my dovetail saw from Axminster.
Now Phillip you up set me as I paid nearer £16. I even have MTS app on phone did not think to look.
20 April 2013 at 9:35 pm #11185I know I’m a little late to the party.
For the USA folks I thought I would add a little to the discussion. After looking around online and seeing the prices, with shipping, for the 1.5″ model, I decided to cast a slightly larger net and look for the next size up as well. I was not ready to pay upwards of $35 for a hammer. I hate paying shipping costs.
After much thought and searching I decided on this one from Amazon.com http://www.amazon.com/gp/product/B001HWAGC2/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3QQ2HBA92VYT9 .
I bought it from CMC Supplies and they shipped it very quickly. I bought on a Tuesday and it arrived on Saturday. Coast to coast shipping. They have raised the price since my purchase, but if you want a hammer a little bigger than Paul’s this might be for you.
Just a short disclaimer about my relationship to the seller on Amazon… I have no affiliation with CMC Supplies, I’m just a happy customer.
Now I think I’ll go smash some stuff with it 🙂
http://www.hammersource.com is where I bought mine. On their page the product number is NT150 and it is the Thor (made in England) 12-712N hammer with a wooden handle. It was $21.99 for the hammer and $12.39 S/H for a total of $34.38. Freight was a bit pricey, but it is a good hammer and it arrived within two days of ordering.
-
AuthorPosts
- You must be logged in to reply to this topic.