Podium design – using plywood help

Welcome! Forums General Woodworking Discussions Woodworking Methods and Techniques Podium design – using plywood help

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #661119
    Greg Sarsons
    Participant

    Well I can cut a dovetail but I’ve never attempted to build something like this. Given stability concerns I thought using nice think veneer plywood would work but I haven’t got the foggiest idea how to create the joints. Maybe I’m over thinking this. The picture is desired end product. Any suggestions on how build this to be solid I’d greatly appreciate.

    #661163
    Colin Scowen
    Participant

    If I look at that, I see mortice and tenon joints for all of it. Complexity really depends on how many joints you want that are not 90 degrees. If you taper the sides of the front, but keep it and the side pieces vertical with respect to the base, then only the top would be angled,

    Colin, Czech Rep.

    #661554
    Greg Sarsons
    Participant

    Tks Colin for the comments.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.