Sanding Dust
- This topic has 1 reply, 2 voices, and was last updated 9 years, 2 months ago by .
- You must be logged in to reply to this topic.
Welcome! / Forums / General Woodworking Discussions / Finishing / Sanding Dust
Hello all
Glued up my latest project which is a box. I managed to limit the glue squeeze out which is good but of course there will always be some squeeze out. I got the big stuff off with a plane blade and a chisel but for the marks the glue leaves I have to sand them out. Problem is, the dust that comes from that gets stuck in the corners. Any tips on how to remove this?
Raze, some people have good luck with coarse sawdust. Use the sawdust to rub the glue while it is still wet. It will absorb most of the glue and should be pretty easy to remove. If you still get dust in corners after sanding glue marks, you could try wetting a cloth with mineral spirits to wipe it out.