Shopping List

Welcome! › Forums › Project Series › Tool Chest › Shopping List

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 31 October 2013 at 7:46 pm #20646
    harshdoug
    Participant

    Here is a shopping list that I made for my toolbox that I plan on making. It shows each board and what pieces I can get out of each board. My supplier has random width boards so for me finding a 7″ wide or 12″ wide board is not an issue.

    The only thing that is not included is the plywood, the panel support and the internal trim.

    These measurements are based on the info provided on the project information page of the series.

    Hope this helps out someone else.

    31 October 2013 at 9:52 pm #20653
    Mark Armstrong
    Participant

    I am sure someone will appreciate your hard work in producing that lists and what you could get out of each board.

    Dagenham, Essex, England

    2 November 2013 at 5:47 pm #20717
    Hello-ItsJim
    Participant

    Thanks

    2 November 2013 at 6:10 pm #20720
    JerryH
    Participant

    I take you used CutList pro to produce this? I have been thinking of getting that software for some time.

    27 May 2017 at 11:16 pm #312375
    Michael Butterfield
    Participant

    Thank you for putting this together. I am undertaking the tool chest project, (after completing many of the current projects) and this list will serve as an excellent starting point.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.