- 11 October 2018 at 8:50 am #552638tenjinParticipant
I’ve finally finished my workbench drawer. Made with recycled timber as always. Bit of a patchwork of wood this one, but you can’t build with what you don’t have. 😀
I went a bit crazy and made a massive one, which now I’m thinking might be a bit heavy to open once it’s full, but hey…
The knob was turned from the leg of an old coffee table. I went big with it as the drawer will be heavy when full, and I wanted to hold it with my hand rather than finger tips, and also as it’s not in my way.
Does anyone know if Paul’s video series will cover the insert tray he has in his drawer?
I’m sure it’s pretty simple, but wanted to see his in case there was something I should take into account.
11 October 2018 at 11:05 am #552644
- This topic was modified 1 year, 3 months ago by tenjin.
that looks really good! I’m going to start making mine today by cutting the hole
I’m guessing that paul has deliberately left out the divider info on purpose, so that you can decide for yourself, after all everyone will have different tools and requirements, some people may not need exactly the same size drawer. You could make a tight fitting frame that fits inside that is removable.28 October 2018 at 12:11 pm #552858
I finished mine recently, I’m going to go for either a hole for the handle or brass brusso drawer pull, here’s a few pics,28 October 2018 at 12:13 pm #55286328 October 2018 at 8:10 pm #552872
I hope you don’t think I’m hijacking your thread Darren, I was going to start a new one but thought it’d look silly doing that, all the best, Ben.
- You must be logged in to reply to this topic.