Breadboard-end Cutting Board Gallery
Welcome to the Breadboard-end Cutting Board community gallery. You can see all the project information here.
Here is Paul’s example…
And now it’s over to you!
Breadboard-end Chopping Board by btyreman
Breadboard End Cutting Board made using Meranti with Oak pins, finished with de-waxed shellac sanding sealer then tung oil.
Breadboard-end Cutting Board by Andy Cleland
Breadboard End Cutting Board. Red Alder.
Breadboard-end Cutting Board by Brandon Avakian
Breadboard-end Cutting Board – walnut and white oak
Breadboard-end Cutting Board by Mike Prutz
Rock Maple and African Mahogany with a mineral oil finish. Thanks Paul!
Breadboard-end Cutting Board by Greg Merritt
Cherry field and white oak ends.
Breadboard-end Cutting Board by Robert Nieuwenhuijs
The cutting board is a present for my brother. I used the remaining oak to make two small boards for my sister. It was a great project!
Breadboard-end Cutting Board by Greg Berlin
Cutting Board from Dibetou (Afican Walnut) Wood w/ Mineral Oil
Breadboard-end Cutting Board by BarryB
Cutting boards made with birds eye maple
Breadboard-end Cutting Board by Alvaro Villalon
This is made of Rauli (chilean hardwood) and Oak for the breadboards and center strip. I make some kind of recess with the spokeshave on each side for grabbing it with the fingers while stays on top of a table. My very first mortise and tenon… I made a few mistakes and they are not as accurate as they should but I think they would hold on just fine for a reasonably time… I hope 😉
Breadboard-end Cutting Board by david o’sullivan
16″x12″ cherry ,finished with liquid paraffin
Breadboard-end Cutting Board by hhcraft
oak and walnut breadboard
Breadboard-end Cutting Board by Arthur De Meyer
My first Masterclass project hence stuck to the instructions with only deviations being to the measurements to suit the timber used.. Made entirely from Beach and finished with vegetable oil.
Breadboard-end Cutting Board by Darrin Stewart
Oak cutting board (first attempt – shoulders aren’t tight, but I’ll do better next time!)
Breadboard-end Cutting Board by cubb
breadboard end cutting board
breadboard end cutting board by Martin King
First chopping board, made in oak
Breadboard-end Cutting Board by mfletcher
Tea Tree board with Huon Pine ends.
Breadboard-end Cutting Board by das0521
Breadboard End Cutting Board – white oak, a bit more challenging than I anticipated!
Breadboard-end Cutting Board by andii
Made from Tasmanian oak. Did not shape the board as I thought the square board had a modern look.
Breadboard-end Cutting Board by adswift
Breadboard-end Cutting Board by Christmas Presents
Christmas presents for the family.
Breadboard-end Cutting Board by rgjohn19
Red oak
Breadboard-End Cutting Board by Tom Benim
Walnut and Cherry Breadboard End Cutting Board, mineral oil finish 9″ X 16″ X 1.5″
Breadboard-end Cutting Board by martinemil
First attempt. White oak.
Breadboard-end Cutting Board by Steve Araiza
Red oak panels, soft maple ends, walnut dowels, and walnut oil finish
Breadboard-end Cutting Board by Will Miller
My first cutting board
Breadboard-end Cutting Board by George Harris
Cedar, air dried, with Iroko pins
Breadboard-end Cutting Board by mercified
hard maple; mineral oil & beeswax
Breadboard-end Cutting Board by Richard Taylor
Breadboard end cutting board made from 8/4 figured maple. Thanks for the clear instructions on how to build this project. Was challenging and extremely fun to build. Thanks again for your inspirational teachings Paul.
Breadboard-end Cutting Board by Ben Tyreman
Breadboard-end Cutting Board made from quartersawn Beech, finished with pure tung oil.
Cutting Board, Spatula and Spoon with assistance from timbermoose
Cutting board by my son and spatula and spoon by my daughter. For their mummy for Christmas. She cried.
Cutting Board by R Phillips
Oak, 8.5”x13”, no glue
Breadboard-end Cutting Board by Karey Reese
Cherry Cutting Board
Breadboard-end Cutting Board by James Light
My wife wanted a small cutting board, so I made this one out of Bradford Pear that had to be cut down because it was dying. Ends trimmed with White Oak.
Breadboard-end Cutting Board by David Vergona
1 1/8 thick oak cuting board. Wood from pallets from Kubota tractors
Breadboard-end Cutting Board by deanbecker
Riff sawn white oak with mahogany draw bore pins
Breadboard-end Cutting Board by Gabriel G.P.
Oak Breadboard-end Style Washing machine Top to cover a gap behind it in our small kitchen, I’ve had great deal of fun to making it thanks to the Paul teaching skill.
Breadboard-end Cutting Board by Nathan Jones
This cutting board I made is built from wormy chestnut and cherry for the middle and ends. I used a double mortise and tenon so it doesn’t warp. The board is quite large and also thick with the ends curving down for moisture run off and I just liked the look. Ergonomically it’s nice when chopping. Oiled with linseed. Some shaping was done on the ends for decoration.
Breadboard-end Cutting Board by chason Hayes
Home cut air dried white oak. It was really good at helping me with my skill development
Breadboard-end Cutting Board by fasaxc
Breadboard-end cutting board in sapele and oak. A surprisingly tough project!
Breadboard-end Cutting Board by Tim F
Maple and cherry with a tung oil finish. No glue used, so fingers crossed it lasts as long as the Penryhn castle piece! Thank you Paul.
Breadboard-end Cutting Board by Terry Baxter
I used the rough sawn oak that had woodworm in the wany edge. This project taxed me way beyond what I expected. Thanks Paul!
Breadboard-end Cutting board by KevBran
Sapele and maple cutting board, a gift for the MIL
Breadboard-end Cutting Board by Pantelis Panteli
Beech cutting board – no glue used
Breadboard-end Cutting Board by Floren
I used ash tree for the central boards and black birch for the end boards.
Thank you to everyone who has sent a picture in!
If you would like to submit a picture to the gallery, please use the submissions form.