Tool Drawer Organiser Gallery
Welcome to the Tool Drawer Organiser community gallery. You can watch Paul’s introduction to the project here.
Paul’s example…
Tool Drawer Organizer by Lisa Burt
Tool Drawer Organizer (or ‘Organiser’ for you Brits) — Poplar and canary wood with 1/4-inch thick cowhide tab pulls. First attempt at blind dovetail drawers.
Tool Draw Organiser by c fenton
This Drawer organizer is made from pine with cherry drawer fronts. Finished with three coats of polyurethane
Desktop Drawer Organiser by Taniguchi C., all the way from Brazil!
A hybrid of paul’s newer desktop organizer with the older 2-drawer tool organizer. Thats funny, because im not an organized man at all. Carcass made from Cedrinho (translates from portuguese as “little cedar”, but its a hardwood – although a rather light and not so hard one) and the drawer fronts and breadboard-end edges are Angelim Pedra (stone-Angelim. Yes, it is as hard to mill as the name implies.) Finished with a self concocted Danish Oil (1/3 boiled linseed oil 1/3tung oil 1/3 mineral spirits), topped with 3 coats of amber/dark orange shellac (only one which I had access to. Both finishes darkened the wood quite a lot. The Cedrinho is a quite clear toned, bland wood, which came to life quite aurprisingly with the shellac over the oil (the oil alone didn’t gave it too much color or grain contrast) and the angelim was an orange-pinkish, quite clear too, and became this rich reddish-brown. The top and drawer fronts are “french half-polished” as I kind of gave up midway because I was unsure of what I was doing. But I liked the end result anyway. This was my first dovetailed carcass, first half blind dovetails, second breadboard ends (man, those things are hard to make. the joint lines are pretty gappy at the top- and thats the good side up!) Thanks a lot Paul, Joseph, Phil and crew for the amazing content. You reach out and touch peoples lives, giving us something special to cultivate and strive for .
Tool Drawer Organiser by rayc21
Made from Pine and Brazilian Mahogany finished with 3 coats of shellac and waxing
Tool Drawer Organiser by Larry Elam
Made from base and drawer front made from walnut top and sides from maple drawers made from ash
Tool Drawer Organiser by Jonathan Rahall
I did not wait to see how to make the leather loop handles and improvised my own.
Tool Drawer Organiser by Kurt Schultz
Built from scrap pine intended for the fire pit. Now a most useful craft organizer for my wife. Fronts are maple. Finished with shellac.
Tool Drawer Organiser by Mersey
Tool Drawer organiser by Geoff Taylor (Nyda)
Tool two drawer unit made with offcuts from previous projects. White oak drawer fronts, carcass Kiwi clear pine, ply back and drawer bottoms (apologies to Paul)
Tool Drawer Organiser by Andrea Mazzini
Spruce carcass, beech drawers with a mahogany front panel.
Tool Drawer Organiser by Harold
Pine carcass and cherry drawer fronts
Tool Drawer Organiser by Fred J Brotherly
Top /Bottom/and Drawer Fronts are Fumed Rift white oak and the sides are Poplar Rift White Oak
Tool Drawer Organiser by John Choi
Pine for the carcass and drawers with veneers for drawer front faces.
Tool Drawer Organiser by Paul Rowell
Pine carcass, not sure what the drawer fronts are, they were salvaged from an old set of drawers
Tool Drawer Organiser by ENRIQUE HULSZ
Paul’s design, just scaled it a little bit. Made out of Pine, drawer bottoms and cabinet back included. Finished with tru-oil and padded shellac. I use it for storing my chisels.
Tool Drawer Organiser by Adam
Tasmanian Huon Pine top and drawer fronts. Tasmanian Oak for the rest.
Tool Drawer Organiser by Sharon Casa
Poplar and cherry finished with shellac and wax
Tool Drawer Organiser by joshuashebert
Tool Drawer Organiser by Nicolas
Tool Drawer Organiser by Ilir Gorani
The one on the left is oak with maple drawer fronts. The one one the right is pine with cherry drawer fronts.
Tool Drawer Organiser by David Vergona
3 drawer tool organizer, pine
Tool Drawer Organiser by Nick Kerr
I made a standard one and then a wider one – Pine and White Oak drawer fronts.
Tool Drawer Organiser by nogbad
Constructed using sapele rescued from scrap on building sites.
Tool Drawer Organiser by Gabriel Pefcik
Pine Carcass, Oak, Maple drawers, Rust-oleum Chalk paint top and bottom, Shellac & Wax finish
Thank you to everyone who has sent a picture in!
If you would like to submit a picture to the gallery, please use the submissions form.