Marvellous Miscellany Gallery
Welcome to the Marvellous Miscellany community gallery. This gallery is for all the projects that don’t quite fit anywhere else!
![Desk Clock by mxbroome1](https://woodworkingmasterclasses.com/wp-content/uploads/2024/07/Desk-Clock-by-mxbroome1-768x1024.jpg)
Desk Clock by mxbroome1
Started out as a way to use some scrap walnut. Dots were formed from oak using plug cutters.
![Console Table by John Burton](https://woodworkingmasterclasses.com/wp-content/uploads/2024/07/Console-Table-by-John-Burton-768x1024.jpeg)
Console Table by John Burton
Curly Maple, Birds Eye and Cherry Hall Table. Handcut dovetails and mortise and tenon joints.
![Console Table by David Caley](https://woodworkingmasterclasses.com/wp-content/uploads/2024/07/Console-Table-by-David-Caley-768x1024.jpg)
Console Table by David Caley
Walnut and rippled sycamore. I used Paul’s idea for the drawer front but went slightly off piste after that. Finished in Osmo oil and Alfie Shine wax
![Cat Litter Box by Orestis](https://woodworkingmasterclasses.com/wp-content/uploads/2024/07/Cat-Litter-Box-by-Orestis-1024x768.jpg)
Cat Litter Box by Orestis
Pine carcass and door frames, plywood, beech feet recycled from an old couch. Inspired from Paul Sellers dovetail and door making videos.
![Small Welsh Dresser by Nick Kerr](https://woodworkingmasterclasses.com/wp-content/uploads/2024/07/Small-Welsh-Dresser-by-Nick-Kerr-768x1024.jpg)
Small Welsh Dresser by Nick Kerr
Made from European Oak. Little did I know that I would ever be able to make something like this when I accidentally stumbled across Paul on Youtube seven years ago. Many thanks, Paul.
![Single Bed by Tom Hill](https://woodworkingmasterclasses.com/wp-content/uploads/2024/06/Single-Bed-by-Tom-Hill-768x1024.jpg)
Single Bed by Tom Hill
Single bed for grandson. Black walnut, bookcase head and foot board that can be easily disasimbled and dovetailed drawers.
![Smokehouse by Cyril Le Guienne](https://woodworkingmasterclasses.com/wp-content/uploads/2024/03/Bedside-Cabinet-by-Cyril-Le-Guienne-577x1024.jpeg)
Smokehouse by Cyril Le Guienne
Here’s a piece mostly based upon Seller’s home bedside cabinet’s design. It’s made of pine, spruce and plywood. Except it’s not a bedside cabinet…but a smokehouse! The drawer is located at the bottom to receive the smoke generator in order to ease cleaning operations after use.
![canoe (Featherweight Boatbuilding by Mac Mccarthy) by thiel2](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0241-e1438786266150-765x1024.jpg)
canoe (Featherweight Boatbuilding by Mac Mccarthy) by thiel2
The hull was built of pine, the trim and seat of red oak, handle is mostly hickory, and the storage compartments were of all three. This is where I stretched the limits of my machines and began to realize they could not provide me the level of craftsmanship I desired in my work. Woodworking Masterclasses with Paul Sellers has lifted me over that hump. With his methods using sharp irons and traditional skills you soon become the crafts person of your project. The result of your work then, only comes from the intentional actions of your trained body and creative mind.
![Mesquite & Crape Myrtle End-Table by Mexiquite](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_8166-819x1024.jpg)
Mesquite & Crape Myrtle End-Table by Mexiquite
Found this huge 30″ mesquite and added crape Myrtle legs from my neighbors brush pile. Turned out quite lovely. My son approved of it.
![Buffet by Hugh Cameron](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0539-1024x768.jpg)
Buffet by Hugh Cameron
African Padouk Buffet with beech raised panels, hoop pine drawer sides and backs and mackay cedar top and door panels. With 127 dovetails in total. Made for a HSC school project at the kings school Australia.
![A wooden toy, with a flapping tail by knightlylad](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/2015-August21-00007-7-1024x603.jpg)
A wooden toy, with a flapping tail by knightlylad
Walnut, a project from a wooden toys book, children and adults love them, they are great!
![Glass display case by reiff825](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image23-1024x768.jpg)
Glass display case by reiff825.
Cherry case
![Wallclock by Salko Safic](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/combined-769x1024.jpg)
WALLCLOCK BY SALKO SAFIC
Islamic Prayer Times Wall Clock
![Computer Desk by NikonD80](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/JPlace-Desk-948x1024.jpg)
COMPUTER DESK BY NIKOND80
I made this Desk basing it on various MasterClass projects; tool cabinet drawers, occasional table and the craftsmen lamp. The desk is made from White Oak with Sapele addded to the handles. I had to make the legs out of White Ash and then laminate the Oak on top as I didn’t have any Oak thick enough – I based them on the Stickley method. This is the first project I’ve done that is my design.
![Coffee Table by johnxman](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Walnut-Table-768x1024.jpg)
COFFEE TABLE BY JOHNXMAN
I modified the coffee table project to be taller and narrower, and left out the magazine rack. This table was designed to hold a statue. Material is walnut with 4 coats of garnet shellac and paste wax on the top. the upper tenons were designed as mitred tenons that meet each other within the leg.
![Cabinet on Stand by Orestes](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0667-e1447296764746-768x1024.jpg)
Cabinet on Stand by Orestes
cabinet made of pine, painted on a turned leg stand
![Hillbilly Tansu by Greg Merritt](https://woodworkingmasterclasses.com/wp-content/uploads/2014/11/hbt2-43-1024x1024.jpg)
Hillbilly Tansu by Greg Merritt
My own design in cherry, pine and birch ply. Hand tied “hardware” and kolrosing decoration.
![Jewelry Storage Mirror by AnthonyH](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_9064-683x1024.jpg)
Jewelry Storage Mirror by AnthonyH
My wife originally asked for a Full-length mirror, but I also wanted to build her a jewelry box, so I decided to combine the two. Finished the project the week of Christmas. It wasn’t a surprise, but she is grateful nonetheless. It’s an original design with cues from a few products I found surfing the web. The 1/8”-thick earring rack is something I came up with because a few of my wife’s earrings won’t fit over the common rack’s top slot and I thought it was an inconvenience to remove the backing just to mount it through a whole, so the apostrophe shape seemed like the best remedy. The ring storage is 1/8”-thick, dovetailed mahogany box (11-7/8”L x 3-3/4”W x 1-1/8”D) with 1/8”thick plywood bottom. It is stained with General Finishes Black Gel Stain and finished with three coats of Zinsser SealCoat. The foam ring-holding insert is folded over and glued then covered with Rockler’s adhesive velvet sheets. It is affixed to the case back with brass screws. The bracelet holders were purchased from Amazon. I cut of the base and shortened the stem. A 1-5/8” stainless steel screw affixes it to the case back. The case is made from 13/16”-thick mahogany and measures 65”H x 21”W x 4-1/2”T. The corners are dovetailed (in the wrong direction…’live and learn’) and the 1/2” mahogany plywood back-panel is screwed into its rabbeted back. The inner mirror (12” x 12”) has mitered corners and is also made from mahogany. The purpose of it is so my wife doesn’t have to close the door each time when selecting a necklace or earrings. It has proved to be a good idea. The shelves are all glued into stopped dados and the center shelf provides structural strength to hold the case sides in place. The space at the bottom is purposely left open. I will add a feature there in the future once the need arrises. It could be tilt-out bins (think potato bins), drawers or something else. The mahogany door is mortice and tenoned using Freud 99-761 Ogee Rail & Stile Bits and 54-760 Glass Panel Door Cutter. I used these bits to create 2” tenon and chopped the mortice by hand. The mirrors are 1/4” thick and very heavy so I though a 2”+ tenon was warranted. The door attaches to the case using Rockler’s 15in-lb torsion hinges. I bought a heavier set first but they were extremely stiff. I can’t see ever needing more than 15in-lbs for most woodworking projects. The 45 necklace holders are 1-3/4” Shaker Pegs from Lee Valley. They finished with General Finishes Java Gel Stain and three coats of Deft Satin spray Lacquer. Their tenons are glued into mortices on mahogany strips (18”L x 1”W x 1/”T). The six strip affix to the frame to hold the 1/4” mahogany plywood mirror backer in place with brass screws. The legs are also made from mahogany but they were from a different tree and much lighter than the feet and case (also true of the mirror and earring holders). They were stained with General Finishes CandleLite Gel Stain. The legs have double draw-bore (white oak dowels) tenons into the feet. The legs attach to the case using Lee Valley’s Chavel Bolts. All the corners where eased using a plane and sanded to 180 grit. The project was finished with three coats of SealCoat shellac and three applications of Minwax pastewax using 0000 steel wool. This project was a pleasure to work on and gives an extra sense of accomplishment knowing it was my design. This is my first large project without outside plans. I hope it inspires others to venture outside the box and develop your design skill.
![Bookcase by billlatt](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_20151220_195907_kindlephoto-20565234-517x1024.jpg)
Bookcase by billlatt
Pine bookcase with hand sawn dados, beaded and tongue and grooved panels, #48 plane and 3/8 beading plane were used.
![Faux Fireplace of painted Poplar by James McIntosh](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/thumbE6LO9PA8-1024x768.jpg)
Faux Fireplace of painted Poplar by James McIntosh
Faux fireplace with a flatscreen 32″ TV and DVD player.
![Craftsman-style Lamp by woodwrkr](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image-2.jpg)
Craftsman-style Lamp by woodwrkr
Arts and crafts adjustable floor lamp
![Dog Bowl Holder by lowpolyjoe](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Photo-2016-01-14-14-24-53-1024x768.jpg)
Dog Bowl Holder by lowpolyjoe
Dog bowl holder for my mastiff made from maple butcherblock counter top found in the trash
![Raspberry Pi Hifi by Pete Annonymous](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/2016-02-09-22.14.56-1024x576.jpg)
Raspberry Pi Hifi by Pete Annonymous
Mahogany frame with walnut panels.
![3 Joints by roy8693](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/My-three-joints-e1487267236863-1024x576.jpg)
3 JOINTS BY ROY8693
These are the my first “3 Joints” along with the tools I used to make them. I used construction grade 2×4 scraps. This was my practice for building Paul’s workbench. They may not be furniture grade but they are utilitarian enough for a workbench.
![Bench by Muk (Germany)](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_1639-1024x768.jpg)
Bench by Muk (Germany)
Small bench. Height of a chair. Oak Oiled. Mortise Tenon Joint. Tempered legs. Top decorative coated plywood fixed with 4 (How do You call it? Those little pieces to screw the top to the rails?)
![Guitar wall hanger by Nikola Maoduš](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_9793-484x1024.jpg)
Guitar wall hanger by Nikola Maoduš
Made from scrap wood. Used a piece of spruce for the back and a piece of fir for the arms of the hanger. Impregnated with linseed oil and coated with 3 layers of clear water based lacquer. Board thickness 20 mm.
![Renovating a Stanley/Bailey No5 Plane by Kenneth Bownes](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Bailey-N05-plane-1024x768.jpg)
Renovating a Stanley/Bailey No5 Plane by Kenneth Bownes
Restoring a No5 Plane Made in England
![A hallway seat / shoe rack by Martin Smith](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/P1030362sm.jpg)
A hallway seat / shoe rack by Martin Smith
Based loosely on the Sofa Table design but changed to be the right height for sitting on to do up your shoes. Pine with a shellac finish.
![Lectern by Misha](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_9406_2-688x1024.jpg)
Lectern by Misha
Pine. Oil, shellac, wax.
![Rolling Kitchen Cart by lowpolyjoe](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Photo-2016-03-20-12-31-08-1024x768.jpg)
Rolling Kitchen Cart by lowpolyjoe
Rolling Kitchen Cart made from Maple Butcher Block
![not-so-poorman's router plane by Richard Groomer](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0003-1-1024x765.jpg)
not-so-poorman’s router plane by Richard Groomer
I found a router plane blade by Ulmia in my used hardware store. Because the blade is 5.6mm thick X14mm wide I cut and filed a groove to fit the blade and captured the blade with an electric guitar cover plate. To tighten the blade I have a brass screw and thumbscrew. I want to cut the screw and peen it over the thumbscrew. Any suggestions out there on how to do this? I used 2 pieces of scrap wood for the body. Ash and cherry. I have found ash to be difficult to work with because it splinters easily.
![Book Shelves by rtexacwby](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/bookcase-e1466515067994-768x1024.jpg)
Book Shelves by rtexacwby
Barrister Bookcase. This is the prototype I built using pine. The bespoke piece will be made using quarter-sawn oak and will be five units tall rather than two. My lady is pleased since she gets to keep this one.
![Sofa table by dancbarber](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/2016-03-16-13.39.34-1024x768.jpg)
Sofa table by dancbarber
Walnut Vanity for Master Barber; modified from the sofa table project; all hand-planed including the half-lap shelf boards which sit into a rabbit and are secured with handcut (not by myself) copper nails.
![Cam Clams by Roger Mason](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image1-1-1024x765.jpg)
Cam Clams by Roger Mason
Australian Blackwood with 19mm x 3mm steel bar and leather pads
![Sharpening setup a la Paul Sellers by joeleonetti](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Sharpening-setup-a-la-Sellers-1024x768.jpg)
Sharpening setup a la Paul Sellers by joeleonetti
Baltic birch plywood; double sided tape; 3/4″x1/4″ strips (easier to nail than mortis in); working up courage to sharpen freehand.
![Offset Corner Cupboard by nljsellers](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/20160507_141915-2-e1465379975608-576x1024.jpg)
![A face frame with doors by Jonesywoo](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/01flat-e1465913367673-768x1024.jpg)
A face frame with doors by Jonesywoo
This is the clear pine face frame and doors I made for a customer to fit on a built in TV cabinet
![Beech Spoon by Bossyrangs](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_20160615_210202-1024x768.jpg)
Beech Spoon by Bossyrangs
My first spoon using hand tools. I love it, so many more to come!
![Lantern by Sandy](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_2441-1-e1466514907938.jpg)
Lantern by Sandy
A small Lantern with a steam bent handle. It is not glued but is held together by pins on the top and bottom.
![Rebate Plane by Brian P Burch](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Rebate-Plane-1024x768.jpg)
Rebate Plane by Brian P Burch
This is my first attempt at building the Rebate Plane. I have a fence to attach and I think I am going to refine the wedge.
![Bennet Street Cabinet by sherbin18](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0532-1024x768.jpg)
Bennet Street Cabinet by sherbin18
Based on the same, made of Sapele, Door Panels are Zebrawood, 5 inside drawers with Blind Dovetails. Cabinet is made with handcut dovetails.
![My First Adirondack Chair by Giuliano Guarino](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Adirondack-Chair_-2_Feb2016-1024x1024.jpg)
My First Adirondack Chair by Giuliano Guarino
A classic-modern adirondack chair. Built with Red Oak. Stainless steel fasteners (Torch screws and Carriage bolts). Finished with Pure Tung Oil.
![Wooden Jointer Plane by Chris Cooper](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Jointer-plane-with-fence.jpg)
Wooden Jointer Plane by Chris Cooper
Unable to match Paul’s skill in squaring up edges, I built a jointer-length plane (18 inches) out of Padauk and a Hock plane blade, then attached a white oak fence using screw knobs and brass screw inserts. After building this, I got rid of my Delta benchtop jointer. It turns out this is easier to use than the machine and more consistent. It has been indispensable; I use it constantly.
![Key Cupboard by Andreas Gustafsson](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/key_cupboard-725x1024.jpg)
Key Cupboard by Andreas Gustafsson
Key cupboard. Mahogany door – chip carved rose – door finished with shellac.
![Sewing Table by bpick](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/sewing-table-1024x576.jpg)
Sewing Table by bpick
My wife wanted a sewing table and I decided to make it using hand tools only. Paul’s lessons made this possible. It is made with alder, stained golden oak, and finished with shellac.
![Shop-made Tools by Reno](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Maple-Tools.jpg)
Shop-made Tools by Reno
Wood used is roasted (“torrified”) maple. Bottom: marking knife. Center: square awl. Right: compass plane. Left: router plane. The sole is made from 18mm polycarbonate, and the cutter is an offset screwdriver, retained with a set screw. Roasted maple is sufficiently hard that it can be tapped and will retain machine screws.
![Refurbished Chisels with Replacement Handles by Matthew Chapman](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Chisel-Handles-1024x768.jpg)
Refurbished Chisels with Replacement Handles by Matthew Chapman
Chisel restoration; Beech handles with copper ferrules on the chisels and cherry with copper ferrule on the marking / scribing knife. Matthew Chapman..
![Reclaimed Wood Lamp by andii](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Lamp-672x1024.png)
Reclaimed Wood Lamp by andii
Reclaimed wood and resin LED lamp. Made from reclaimed pallet wood. I suspect the wood is spotted gum.
![Log Drum by Ian Lambert](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Log-Drum-1024x630.jpg)
Log Drum by Ian Lambert
Pine dovetailed box with a birch ply base. Top with the “tongues” cut into it is Scottish cherry. If you have a look online you can hear a professional one being played at a German company called Schlawerk. My sound is not as wonderful as theirs but it’s not bad and will hopefully please a young granddaughter. The whole tuning thing is tricky!
![Garden Shed with Green Roof by Ian Lambert](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/envymachine-1024x576.jpg)
Garden Shed with Green Roof by Ian Lambert
Shed frame “4×2” CLS lumber clad on the inside with 12mm ply to brace it. Rafter and exterior cladding are larch. Veranda roof supported on 6x6ins posts with a 6x9ins. Beam all green oak to help support the green roof. Roofing timber and all the green roof material weighed in about about 2 tonne. Door and window recycled from our cottage. Shed completed September 2015 with the green roof garden added in spring 2016. It was a wonderful project to do.
![Garden Gate by senrabc](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/one-man-and-his-gate-e1473162431602-576x1024.jpg)
Garden Gate by senrabc
New fence gate. Thanks Paul for inspiring me. All Mortise and tenon with a rebate for the slats. All hand tools. First mortise and tenon I ever chopped. Please keep making videos. You inspire us all. Thanks Again. On to the bookcase!
![Plane Reconditioned by clarkfreese](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Plane_ClarkFreese-1024x768.jpg)
Plane Reconditioned by clarkfreese
Not having a Bench plane I became encouraged to purchase and recondition one. Reconditioned Bench plane Stanley #4, Type 19
![Trinket/Display Box by Roy Ashmore](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Trinket-Display-Box-by-Roy-Ashmore-1024x768.jpg)
Trinket/Display Box by Roy Ashmore
Nominal 340 square from Parana pine with dovetailed drawer front and mahogany trim. Removable tray under glass top.
![Small Porch Table by Anthony Greitzer](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Small-Porch-Table-by-Anthony-Greitzer--e1480518135281-1024x577.jpg)
Small Porch Table by Anthony Greitzer
Pine Wood
![Letter Box by Nikola Maoduš](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Letter-Box-by-Nikola-Maoduš-1024x408.jpg)
Letter Box by Nikola Maoduš
This is my first, somewhat more complex project and I made it for my home. The idea was to make a letterbox that will receive A4 format letters and smaller packages. As it is installed in the fence the opening for insertion of mail is located in the front and the door at the back is used for picking up the mail. The wood used is a fir, treated with impregnation coating and three layers of wood-stain resistant to UV light spectrum. The inscription and the picture were printed on the waxed paper and transferred to the wood before the staining. The letter box was made by hand tools only. If anyone is interested in more details (joints, transfer of the printed letters and image, pictures…) or the performance of the letter box, please, feel free to ask and I’ll be glad to answer the questions. The transfer of the letters gave some troubles, but eventually it played out really well.
![Meat Mallet by rgjohn19](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Meat_Mallet_by_rgjohn19-e1481639993258-768x1024.jpg)
Meat Mallet by rgjohn19
Meat mallet with ash head and oak handle
![Nightstand by rgjohn19](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Nightstand_by_-rgjohn19-e1481641049356-768x1024.jpg)
Nightstand by rgjohn19
Nightstands made out of pine I made for my parents
![Index Card box by rgjohn19](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Index-Card-box-by-rgjohn19-e1485275079607-768x1024.jpg)
Index Card box by rgjohn19
Made out of pine
![Diamond Plate Holder by timvogan](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Diamond-Plate-Holder-by-timvogan-1024x768.jpg)
Diamond Plate Holder by timvogan
Shop grade birch plywood because I have a lot of scrap. Fine and extra fine is all I can afford for now.
![Wooden Fore Plane by joeleonetti](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Wooden-Fore-Plane-by-joeleonetti-1024x765.jpg)
Wooden Fore Plane by joeleonetti
oak body and pine handle and knob all from scaps I had laying in the shop
![Nightstands by rgjohn19](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Nightstands-by-rgjohn19-e1485943655219-1024x768.jpg)
Nightstands by rgjohn19
Made out of red oak
![Key Hook by rgjohn19](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Key-Hook-by-rgjohn19.jpg)
Key Hook by rgjohn19
Made out of pine
![Mancala Board by mercified](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Mancala-Board-by-mercified-1024x781.jpg)
Mancala Board by mercified
Red Oak. Shellac and wax. Stones found while beachcombing.
![Cedar Bench by mercified](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Cedar-Bench-by-mercified-1024x738.jpg)
Cedar Bench by mercified
Eastern Red Cedar. Through wedged tenons on legs and stretcher. Carved natural edge. Butterfly keys stabilize cracks on each leg.
![Utensils by bpower](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Utensils-by-bpower-e1487084514711-768x1024.jpg)
Utensils by bpower
Burger flipper, pie server, and mixing spatula made from oak.
![Ying-Yang-Stool by paulhuss](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Ying-Yang-Stool-by-paulhuss-1024x576.jpg)
Ying-Yang-Stool by paulhuss
Made out of Ash and Walnut
![Spoon by Daithi O'Riogain](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Spoon-by-Daithi-ORiogain-1024x664.jpg)
Spoon by Daithi O’Riogain
Windfall beech. Olive oil. My first finished spoon. Great fun, made and given with love.
![Toy Car by Daithi O'Riogain](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Toy-Car-by-Daithi-ORiogain--1024x786.jpg)
Toy Car by Daithi O’Riogain
Made from offcuts: iroko, beech, birch, oak, mahogany, ash and bought wheels.
![Sidecar Cot by markdennehy](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Sidecar-Cot-by-markdennehy-1024x683.jpg)
Sidecar Cot by markdennehy
Sidecar cot, made with walnut and ash using only hand tools in an 8’x6′ shed. My first ever piece of furniture.
![Sidecar Cot (drawer detail) by markdennehy](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Sidecar-Cot-drawer-detail-by-markdennehy-1024x766.jpg)
Drawer detail from sidecar cot, made with walnut and ash using only hand tools in an 8’x6′ shed. My first ever piece of furniture.
![Wooden Tools by paulhuss](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Wooden-Tools-by-paulhuss-1024x576.jpg)
Wooden Tools by paulhuss
poor Mans Rebateplane (Cherry, Nut), No4 Smoothing Plane 50 Degree Bettingangle (Ash, Bubinga, Plywood), Marking Gauge (Marple,Nut)
![Penobscot designed by Arch Davis made by Norbert Pauli](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Penobscot-designed-by-Arch-Davis-made-by-Norbert-Pauli-1024x768.jpg)
Penobscot designed by Arch Davis made by Norbert Pauli
Building time 30 month. Timbers from Oregon pine, hull from marine grade ply, trimmings teak.
![Sewing Box by Chris](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Sewing-Box-by-Chris-1024x702.jpg)
Sewing Box by Chris
This is a downsized version of the toolchest to my wife as a sewing box. I made it of ash, and put three coats of shellac as finish.
![Filing Cabinet Re-dressed by Alan Morrison](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Filinf-Cabinet-Re-dressed-by-Alan-Morrison--768x1024.jpg)
Filing Cabinet Re-dressed by Alan Morrison
Op shop three door filing cabinet re-dressed in solid blackwood exterior
![Scoop by Jim Braun](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Scoop-by-Jim-Braun-1024x768.jpg)
Scoop by Jim Braun
Green wood carving, mineral oil finish
![Kitchen Bookcase by Tom Benim](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Kitchen-Bookcase-by-Tom-Benim-e1490711881331-768x1024.jpg)
Kitchen Bookcase by Tom Benim
Cherry finished with wiping poly vanish. This piece was to fit in an overhang of the countertop. Due to odd size, it is actually made as two separate pieces, fitted together on site.
![Shaker Style Table by Tom Benim](https://woodworkingmasterclasses.com/wp-content/uploads/2015/08/Shaker-Style-Table-by-Tom-Benim-768x1024.jpg)
Shaker Style Table by Tom Benim
Shaker Style Table with Drawer from the book “Tables” by Anthony Guidice, Taunton Press
![Three-Legged Stool by btyreman](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Three-Legged-Stool-by-btyreman.jpg)
Three-Legged Stool by btyreman
This stool is a variation of the smaller milk stool, I have made them taller, they measure 70cm high, using redwood pine for the seat tops, legs and braces with sapele wedges. I painted the legs with eggshell white paint, and finished the tops and leg braces with de-waxed shellac.
![Assorted Spatulas by Tim A](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Assorted-Spatulas-by-Tim-A-1024x768.jpg)
Assorted Spatulas by Tim A
Assorted spatulas made from Pacific Madrona (Arbutus menziesei) firewood rescued just in time from my woodpile, using a handsaw I refurbished and sharpened, a refurbished #4, and a spokeshave, drawing from several Sellers’ videos.
![Writing Desk by bytesplice](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Writing-Desk-by-bytesplice-1024x576.jpg)
Writing Desk by bytesplice
Writing desk using 3/4″ maple based on the sofa table project . This is my first project with all hand-cut mortise and tenons. The top is 40″x20″ on a 36″x17″ base with 1-3/4″ legs tapered to 1″. The center rail was moved to the rear legs for comfort, and two 12-1/2″x15″ dovetailed drawers added. Finished with water based polyurethane.
![Rebate Plane by Donn Sword](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Rebate-Plane-by-Donn-Sword-e1493131568482-768x1024.jpg)
Rebate Plane by Donn Sword
I used oak pallet wood for this plane. I’ve been looking locally for one without luck so when someone gave me a broken chisel I had to make this. Thank you Paul for all the inspiration.
![Spoon by rotaryw](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Spoon-by-rotaryw-1024x576.jpg)
Spoon by rotaryw
Oak wood, finished with peanuts seeds oil
![TV Stand by deanbecker](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/TV-Stand-by-deanbecker-1024x768.jpg)
TV Stand by deanbecker
Poplar and cherry, bread board ends, turned cherry knobs and overlays.
![Shacker-style Kitchen Steps by nyda](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Shacker-style-Kitchen-Steps-by-nyda-e1494327439200-768x1024.jpg)
Shacker-style Kitchen Steps by nyda
American oak with 3 styles of dovetail joint
![Table After a Boat by jan beunen](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Table-After-a-Boat-by-jan-beunen-1024x766.jpg)
Table After a Boat by jan beunen
a boat table, made of white oak and meranti, it is inspired by a boat stalled in a dry dock, the structure is laminated and steambended, the legs stand all in a different position to each other
![Wooden Plane by Rafi](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Wooden-Plane-by-Rafi-1024x614.jpg)
Wooden Plane by Rafi
My first plane! The body is Mahoe (Hibiscus Elatus) with a Martinique Prickly Ash (Zanthoxylum Martinicense) wedge. The blade is upcycled from a box store stamped steel block plane. These are native species in Puerto Rico where we call them Majó and Cenizo.
![Shoe Tack by Gundoguk aka Paul](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Shoe-Tack-by-Gundoguk-Paul-e1495638851831-768x1024.jpg)
Shoe Tack by Gundoguk aka Paul
Offcuts of pine used to make a shoe rack for a caravan cupboard
![Wooden Spoon by Misha](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Wooden-Spoon-by-Misha-1024x494.jpg)
Wooden Spoon by Misha
beech
![A Flower Shelf by Misha](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/A-Flower-Shelf-by-Misha-1024x768.jpg)
A Flower Shelf by Misha
Pine. Oil paint.
![Headboard by Paul Taylor](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Headboard-by-Paul-Taylor-1024x620.jpg)
Headboard by Paul Taylor
Walnut head board
![Planter Box by Tolga Avcioglu](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Planter-Box-by-Tolga-Avcioglu-576x1024.jpg)
Planter Box by Tolga Avcioglu
Planter box for honeysuckle made from pine
![Ariondack-style Chair by cobhhive](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Ariondack-style-Chair-by-cobhhive.jpg)
Ariondack-style Chair by cobhhive
Pallet wood and proud.
![Cheese Board by philvogt](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Cheese-Board-by-philvogt-e1499163705457-1024x768.jpg)
Cheese Board by philvogt
American black walnut, finished in shellac and beeswax
![Shooting Board by Raphaël P](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Shooting-Board-by-Raphaël-P-770x1024.jpg)
Shooting Board by Raphaël P
Ash (thermo) and pine
![Computer Desk by Jon Place](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Computer-Desk-by-Jon-Place-1024x951.jpg)
Computer Desk by Jon Place
Quarter Sawn Oak Computer Desk using drawers based on Paul’s Tool Chest
![French Chic Living Room Storage Unit by Jon Place](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/French-Chic-Living-Room-Storage-Unit-by-Jon-Place-1-908x1024.jpg)
French Chic Living Room Storage Unit by Jon Place
Pine Unit painted with Off-White Satin paint. Reclaimed drawer pull. 29″High x 29″ wide x 24″ deep.
![Living Room Storage Unit by Jon Place](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Living-Room-Storage-Unit-by-Jon-Place-1024x768.jpg)
Living Room Storage Unit by Jon Place
Living Room Storage unit with ‘His’ and ‘Hers’ storage areas. Quarter sawn Oak Fumed and finished with Shellac and Wipe-on Poly Varnish. 20″ high.
![Workshop Clamp Rack by Jon Place](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Workshop-Clamp-Rack-by-Jon-Place-e1499168756651-768x1024.jpg)
Workshop Clamp Rack by Jon Place
Reclaimed Pine rack mounted on Castors and finished with Grey Chalk paint. 37″ high x 30″ wide x 12″ deep
![Cedar Strip Canoe by Kenneth Berregard](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Cedar-Strip-Canoe-by-Kenneth-Berregard-674x1024.jpg)
Cedar Strip Canoe by Kenneth Berregard
16′ cedar strip canoe. Atlantic White Cedar for the hull and American Cherry for gunnels, decks, and seat frames. Six ounce fiberglass cloth inside and out.
![Lecturn by jefrog1844's son](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Lecturn-by-jefrog1844-679x1024.jpg)
Lecturn by jefrog1844’s son
Walnut Lecturn With Tiger Maple Carving – built by my son Christian for our local church
![Sauna Door by Misha](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Sauna-Door-by-Misha-790x1024.jpg)
Sauna Door by Misha
A sauna door and a door box. Alder. No glue. Vertical planks are mated with a loose tongue, sliding dovetail and breadboard end. The door box is dovetailed. The door handles will be installed a bit later.
![TV Corner Cabinet by btyreman](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/TV-Corner-Cabinet-by-btyreman-1024x683.jpg)
TV Corner Cabinet by btyreman
Here’s a bespoke corner TV Cabinet I designed myself, based on the knowledge that paul teaches, it has dovetails on the bottom apron, stopped housing dado’s and a bareface stub tenon, the base is made from painted pine and the top from american white oak which was scraped with a no80 cabinet scraper finished with pure tung oil, I chose the top wood carefully to get a cathedral grain look and include the lighter sapwood, there are a few screws for extra support to help strengthen it even further, my client loved it, and I loved making it.
![Mailbox by Michael Cieslewicz](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Mailbox-by-Michael-Cieslewicz-e1504883552973-768x1024.jpg)
Mailbox by Michael Cieslewicz
Mail box post without metal fasteners. Mortise and tennon, with tennon draw tight pins.
![Seaman's Chest by Gerald Spence](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Seamans-Chest-by-Gerald-Spence-1024x768.jpg)
Seaman’s Chest by Gerald Spence
Seaman’s chest in European oak with walnut details. The sides of the chest are dovetailed and required to have a small compensatory slip to be used to correct for the sloping sides of the box.
![Shaker-like tray by mercified](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Shaker-like-tray-by-mercified-996x1024.jpg)
Shaker-like tray by mercified
Tulip poplar with shellac and wax. Bottom is modeled after Paul’s design for the top and bottom of the Keepsake Box.
![Rocking Horse by John Carruthers](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Rocking-Horse-by-John-Carruthers-1024x881.jpg)
Rocking Horse by John Carruthers
a deal carved horse, wax finish
![Library Book Trolley by Ian Lambert](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Library-Book-Trolly-by-Ian-Lambert-1024x575.jpg)
Library Book Trolley by Ian Lambert
“Arts and Crafts” meets Plywood. 16 oak slats for the shelving, 32 housing joints with through wedged tenons. Plywood ends and bottom shelf with an eggshell acrylic paint finish.
![Diamond Plate Holder by André](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Diamond-Plate-Holder-by-André-1024x768.jpg)
Diamond Plate Holder by André
Pine
![Coffee Table by Xavi Molina](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Coffee-Table-by-Xavi-Molina-1024x768.jpg)
Coffee Table by Xavi Molina
Red pine and chestnut. Finish with shellac and wax
![Entryway Bench by mercified](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Entryway-Bench-by-mercified-1024x679.jpg)
Entryway Bench by mercified
hickory; poly finish
![Floor Lamp by Harold](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Floor-Lamp-by-Harold-e1506089821545-768x1024.jpg)
Floor Lamp by Harold
Pine Floor Lamp with contemporary twist
![Step Stool WM](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Step-Stool-WM-1024x569.jpg)
Step Stool WM
Weekend project. The splayed legs make it for a very stable stool. Aside from the leg cutout and handle hole on top (scroll saw), entirely hand tools. Proportions are roughly equivalent to the golden mean.
![Bedside Cabinet by NikonD80](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Bedside-Cabinet-by-NikonD80-e1507217099425-768x1024.jpg)
Bedside Cabinet by NikonD80
Pine Unit painted with Cream Eggshell Paint. Reclaimed picture framing for drawer pulls and Oak top. 26″ high, 16″ wide and 14″ deep.
![fire finish edging](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Fire-Surround-by-norcam-1024x683.jpg)
Fire Surround by norcam
fire finish edging
![Small cabinet made from pine and finished with shellac](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Small-Cabinet-by-Tolga-e1507278722366-768x1024.jpg)
Small Cabinet by Tolga
Small cabinet made from pine and finished with shellac
![elm and glass](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Dining-Table-by-Michael-Gotz-1024x768.jpg)
Dining Table by Michael Gotz
elm and glass
![Based on Paul's Laptop Desk, pine, shellac.](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/School-Desk-by-fedorshapran-1024x768.jpg)
School Desk by fedorshapran
Based on Paul’s Laptop Desk, pine, shellac.
![I promised a door for a friend and he didn't know which design I had in mind. I tried to design it to mimic his way of life (and mine too). So there is the Sun door.](https://woodworkingmasterclasses.com/wp-content/uploads/2016/12/Door-by-Julien-Meklis-684x1024.jpg)
Door by Julien Meklis
I promised a door for a friend and he didn’t know which design I had in mind. I tried to design it to mimic his way of life (and mine too). So there is the Sun door.
![Angelim Pedra & painted poplar lectern made for my son upon graduating seminary](https://woodworkingmasterclasses.com/wp-content/uploads/2017/11/Lectern-by-Phil-Guthe-576x1024.jpg)
Lectern by Phil Guthe
Angelim Pedra & painted poplar lectern made for my son upon graduating seminary
![Writing desk for my wife. Made with quarter sawn cherry, Maple and birdseye maple veneer. Ebony leg cuffs and drawer pulls](https://woodworkingmasterclasses.com/wp-content/uploads/2017/11/Writing-Desk-by-wsilvio3625-1024x683.jpg)
Writing Desk by wsilvio3625
Writing desk for my wife. Made with quarter sawn cherry, Maple and birdseye maple veneer. Ebony leg cuffs and drawer pulls
![For this custom heirloom piece I used mahogany stained a dark chocolate brown to match an existing crib. The style is a combination of Craftsman mixed with a heavy one-piece crest. To make the crest, a 12 degree arc defines the lines. The profile was routed on a table to achieve the same profile as the crib's rail. The joinery was achieved using a Festool Domino, but mortise and tenon could also be a good option. Each of the shelves are 1/4" mahogany plywood edged with solid mahogany. Severa](https://woodworkingmasterclasses.com/wp-content/uploads/2017/11/Changing-Table-by-Sky-Valley-Studios-DA-e1511888096336-768x1024.jpg)
Changing Table by Sky Valley Studios – DA
For this custom heirloom piece I used mahogany stained a dark chocolate brown to match an existing crib. The style is a combination of Craftsman mixed with a heavy one-piece crest. To make the crest, a 12 degree arc defines the lines. The profile was routed on a table to achieve the same profile as the crib’s rail. The joinery was achieved using a Festool Domino, but mortise and tenon could also be a good option. Each of the shelves are 1/4″ mahogany plywood edged with solid mahogany. Severa
![Hi Paul and all, thought everyone would like this, broke my favourite table knife making bread. I know Paul is into recycling, and his favourite stanley is very expensive in Aussie, so how about some better use of a broken butter knife. Works very well.](https://woodworkingmasterclasses.com/wp-content/uploads/2017/12/Layout-Knife-by-Jah-Rap-1024x768.jpg)
Layout Knife by Jah Rap
Hi Paul and all, thought everyone would like this, broke my favourite table knife making bread. I know Paul is into recycling, and his favourite stanley is very expensive in Aussie, so how about some better use of a broken butter knife. Works very well.
![Out of Cherry. I need a lot more practice with these. They're quite difficult for me.](https://woodworkingmasterclasses.com/wp-content/uploads/2017/12/My-First-Spoon-by-Brandon-Sweet-1024x1024.jpg)
My First Spoon by Brandon Sweet
Out of Cherry. I need a lot more practice with these. They’re quite difficult for me.
![Copy of Pennsylvania Spice Chest made of American Black Walnut](https://woodworkingmasterclasses.com/wp-content/uploads/2017/12/Pennsylvania-Spice-Chest-by-Mac-McAtee.jpg)
Pennsylvania Spice Chest by Mac McAtee
Copy of Pennsylvania Spice Chest made of American Black Walnut
![Shoji lamps. This is a collection of Shoji lamps that I have been making. It includes 3 lamps and a table with shoji panels. The woods are cherry walnut and curly maple.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Shoji-Lamps-by-MTaylor-scaled-e1710515520590-768x1024.jpg)
Shoji Lamps by MTaylor
Shoji lamps. This is a collection of Shoji lamps that I have been making. It includes 3 lamps and a table with shoji panels. The woods are cherry walnut and curly maple.
![Laminated White Oak and Walnut, milled to size and shape. Sanded, Sanded, and Sanded then Finished with Clear Polyurathane.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Dual-ChipDip-Tray-by-Roger-A.-Congdon-.jpg)
Dual Chip:Dip Tray by Roger A. Congdon
Laminated White Oak and Walnut, milled to size and shape. Sanded, Sanded, and Sanded then Finished with Clear Polyurathane.
![red oak mission style with hidden footstool finished with shellac and waxed](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Chair-and-Footstool-by-deanbecker-768x1024.jpeg)
Chair and Footstool by deanbecker
red oak mission style with hidden footstool finished with shellac and waxed
![Tasmanian Oak, with Tasmanian Oak plywood.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Steamer-Trunk-by-Ronald-Goodall-1024x784.jpg)
Steamer Trunk by Ronald Goodall
Tasmanian Oak, with Tasmanian Oak plywood.
![broadside display for the bookstore i work for](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Table-with-Broadside-Dispaly-by-timvogan-768x1024.jpg)
Table with Broadside Dispaly by timvogan
Table with Broadside Dispaly by timvogan
![](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Water-Color-Artist-Box-by-Todd-Wegner-1024x1024.jpg)
Water Color Artist Box by Todd Wegner
![I used this project to learn about working with various grain configurations. L-R: Mahogany, Curly Maple, Burled Maple, Cherry, Quartersawn White Oak, and more Cherry](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Spatulas-by-Terry-Gandy-882x1024.jpg)
Spatulas by Terry Gandy
I used this project to learn about working with various grain configurations. L-R: Mahogany, Curly Maple, Burled Maple, Cherry, Quartersawn White Oak, and more Cherry
![wooden hinges, wooden locks](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Wooden-Suitcase-by-Ian-Croft-576x1024.jpg)
Wooden Suitcase by Ian Croft
wooden hinges, wooden locks
![Children's chair that converts to a step stool](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/ChairStep-Stool-by-Christopher-Schlosser-1024x768.jpg)
Chair/Step Stool by Christopher Schlosser
Children’s chair that converts to a step stool
![Not an easy wood to work with and not a perfect piece but my wife loves it so that is a good score.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Dining-Table-by-Owen-Marsh-1024x766.jpg)
![an oak dining table with breadboard ends and Y-stretchers](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Dining-Table-by-David-R.-1024x1024.jpg)
Dining Table by David R.
an oak dining table with breadboard ends and Y-stretchers
![Built as a christmas gift for my daughter, from Oak and Iroko.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Sideboard-by-Adrian-Cole-1024x768.jpg)
Sideboard by Adrian Cole
Built as a christmas gift for my daughter, from Oak and Iroko.
![Cabinet, constructed of white ash, consisting of 72 triangular drawers in the rotating section and 12 rectangular drawers in the lower stationary section.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Rotating-Bolt-Cabinet-by-Dan-Swartz-1024x792.png)
Rotating Bolt Cabinet by Dan Swartz
Cabinet, constructed of white ash, consisting of 72 triangular drawers in the rotating section and 12 rectangular drawers in the lower stationary section.
![Cherry with cherry plywood shelves, and a total of 34 hand cut mortise and tenon joints.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Dictionary-Stand-by-Bill-Sproat-e1517328874644-768x1024.jpg)
Dictionary Stand by Bill Sproat
Cherry with cherry plywood shelves, and a total of 34 hand cut mortise and tenon joints.
![My friends and I play play dice games and have the trouble of keeping our dice on a table and quiet. I made this octagon out of redwood, pieces of ebony and maple block scraps with a plywood bottom fitted into rabbeted edges with black and white leather lining the inside bottom. I wanted to thank Paul and his team for helping me develop the skills and courage to envision and create little weekend projects like these. I plan on making one this weekend out of walnut and maple as a gift for a friend. I'll take pictures as I go and upload them.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/01/Dice-Rolling-Octagon-by-Peter-Gaffney-e1517329339918-768x1024.jpg)
Dice Rolling Octagon by Peter Gaffney
My friends and I play play dice games and have the trouble of keeping our dice on a table and quiet. I made this octagon out of redwood, pieces of ebony and maple block scraps with a plywood bottom fitted into rabbeted edges with black and white leather lining the inside bottom. I wanted to thank Paul and his team for helping me develop the skills and courage to envision and create little weekend projects like these. I plan on making one this weekend out of walnut and maple as a gift for a friend. I’ll take pictures as I go and upload them.
![After watching about every videos from Paul, I finally finished my first woodworking project ( after the bench and sawhorses of course). It is made of walnut. I made a video about the build, you will recognize many of Paul's techniques and tools.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Dining-Room-Table-by-Grégoire-Bouron-1024x1024.jpg)
Dining Room Table by Grégoire Bouron
After watching about every videos from Paul, I finally finished my first woodworking project ( after the bench and sawhorses of course). It is made of walnut. I made a video about the build, you will recognize many of Paul’s techniques and tools.
![Last years christmas present for my sister, first proper go at pyrography, made from a small slab of golden cypress, and my sister was chuffed to bits.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Serving-Platter-by-Ian-Lott-1024x576.jpg)
Serving Platter by Ian Lott
Last years christmas present for my sister, first proper go at pyrography, made from a small slab of golden cypress, and my sister was chuffed to bits.
![Gun cleaning kit for cleaning rifles and shotguns.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Hunters-Gun-Cleaning-Box-by-wtwegner-1024x768.jpg)
Hunter’s Gun Cleaning Box by wtwegner
Gun cleaning kit for cleaning rifles and shotguns.
![Bluetooth module integrated into a dovetail box. Made from pine and cherry.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Bluetooth-Speaker-by-wtwegner-1024x768.jpg)
Bluetooth Speaker by wtwegner
Bluetooth module integrated into a dovetail box. Made from pine and cherry.
![This dog feeder is made out of pine. Carving is done with a cnc.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Dog-Feeder-by-Serge-Debruyne-e1519402907512-768x1024.jpg)
Dog Feeder by Serge Debruyne
This dog feeder is made out of pine. Carving is done with a cnc.
![Adjustable tablet stand for loft bed. I built this from white oak and black locusts. It is to attach to the rail of a loft bed. The mount is adjustable to fit tablets either in portrat or landscape. The dowel allows the mount to turn. Used Paul's raised panel technique to shape the main block. This was a great learning project for me. Thanks to Paul's tutelage, I was able to conceive and execute the several different aspects from lamination, mortice and tennon, rabbits, and raised panels!](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Adjustable-Tablet-Stand-by-Donley-Sissom-e1519403873379-576x1024.jpg)
Adjustable Tablet Stand by Donley Sissom
Adjustable tablet stand for loft bed. I built this from white oak and black locusts. It is to attach to the rail of a loft bed. The mount is adjustable to fit tablets either in portrat or landscape. The dowel allows the mount to turn. Used Paul’s raised panel technique to shape the main block. This was a great learning project for me. Thanks to Paul’s tutelage, I was able to conceive and execute the several different aspects from lamination, mortice and tennon, rabbits, and raised panels!
![I made kitchen cabinets using oak for the edgebanding, the drawer fronts and the side panel. The main body/carcass i made from plywood. The Oak came from locally grown trees. For drawer runners i used full extention ball bearing rvs runner . On my youtube channel you can find several video's on building these cabinets. (RobsWoodshop)](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Kitchen-Cabinet-by-Rob-Appelman-1024x576.jpg)
Kitchen Cabinet by Rob Appelman
I made kitchen cabinets using oak for the edgebanding, the drawer fronts and the side panel. The main body/carcass i made from plywood. The Oak came from locally grown trees. For drawer runners i used full extention ball bearing rvs runner . On my youtube channel you can find several video’s on building these cabinets. (RobsWoodshop)
![Japanese inspired lamp](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Shoji-Lamp-by-MTaylor-1024x962.jpg)
Shoji Lamp by MTaylor
Japanese inspired lamp
![Japanese inspired lamp](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Shoji-Lmp-by-MTaylor-768x1024.jpg)
Shoji Lamp by MTaylor
Japanese inspired lamp
![This is a 14 foot canoe made from okoume marine plywood and mahogany. It is a modified reproduction of a design by Henry Rushton - a canoe builder who lived in Canton, New York in the late 1880's. He was America's premier builder of double-paddle canoes which were very popular at the time. These canoes are usually propelled using a kayak paddle, but they can also be sailed. Mr. Rushton was known for his extremely lightweight and durable canoes some of which weighed about 10 pounds. My canoe weighs only 50 pounds and could be built even lighter if spruce were substituted for the mahogany.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/02/Lapstrake-Canoe-by-Louye2-1024x717.jpg)
Lapstrake Canoe by Louye2
This is a 14 foot canoe made from okoume marine plywood and mahogany. It is a modified reproduction of a design by Henry Rushton – a canoe builder who lived in Canton, New York in the late 1880’s. He was America’s premier builder of double-paddle canoes which were very popular at the time. These canoes are usually propelled using a kayak paddle, but they can also be sailed. Mr. Rushton was known for his extremely lightweight and durable canoes some of which weighed about 10 pounds. My canoe weighs only 50 pounds and could be built even lighter if spruce were substituted for the mahogany.
![Walnut and curly maple. Mahogany and curly maple](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Utensil-Holders-by-kyle-welsing-e1521215918593-765x1024.jpg)
Utensil Holders by kyle-welsing
Walnut and curly maple. Mahogany and curly maple
![Pine shop dresser with panel and groove sides as well as the back. Each drawer has half blind dovetails and some have dividers. The legs have mortises to fit the top and bottom rails which are tenoned. Each drawer is separated with panel and frame dividers minus the panel. The top is particle board that is encompassed with dovetail trim. The particle board was not my first choice but I did not want to throw it out.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Shop-Dresser-by-Anthony-Greitzer-e1521824200939-577x1024.jpg)
Shop Dresser by Anthony Greitzer
Pine shop dresser with panel and groove sides as well as the back. Each drawer has half blind dovetails and some have dividers. The legs have mortises to fit the top and bottom rails which are tenoned. Each drawer is separated with panel and frame dividers minus the panel. The top is particle board that is encompassed with dovetail trim. The particle board was not my first choice but I did not want to throw it out.
![I used a bandsaw and a thickness planer to mill the wood; rest of the work was done by hand tools. I used water based timber care and 3 coats of wood stain on pine.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Planter-Box-by-Tolga-1024x768.jpg)
Planter Box by Tolga
I used a bandsaw and a thickness planer to mill the wood; rest of the work was done by hand tools. I used water based timber care and 3 coats of wood stain on pine.
![Kitchen hutch incorporates methods from Paul's bookcase project (layout, joinery, bullnosing, door fitting, etc). Uses alder and mahogany for door panels and countertop.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Shaker-Inspired-Kitchen-Hutch-by-Michael-Mills-e1522055418980-768x1024.jpg)
Shaker Inspired Kitchen Hutch by Michael Mills
Kitchen hutch incorporates methods from Paul’s bookcase project (layout, joinery, bullnosing, door fitting, etc). Uses alder and mahogany for door panels and countertop.
![A mirror frame made of Ash with a shelf made of Zebrawood. The shelf is actually inset into the frame and the sides of the frame are beveled to create a depth.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Mirror-Frame-by-Bruce-Purdy-e1522060210957-576x1024.jpg)
Mirror Frame by Bruce Purdy
A mirror frame made of Ash with a shelf made of Zebrawood. The shelf is actually inset into the frame and the sides of the frame are beveled to create a depth.
![A copy of Tom Fidgen's Gentleman's Valet. Made from reclaimed sapele with heavea for the drawer and drawer front stringing. Finished with a Maloof mix of oils and polyurethane - wiped on.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Gentlemans-Valet-by-Patrick-Price-e1522060854688-768x1024.jpg)
Gentleman’s Valet by Patrick Price
A copy of Tom Fidgen’s Gentleman’s Valet. Made from reclaimed sapele with heavea for the drawer and drawer front stringing. Finished with a Maloof mix of oils and polyurethane – wiped on.
![1/4 sawn white oak with wayney edge highly figured flat sawn top. Finished with amber schellac and furniture polish](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Hall-Table-by-deanbecker-1024x768.jpg)
Hall Table by deanbecker
1/4 sawn white oak with wayney edge highly figured flat sawn top. Finished with amber schellac and furniture polish
![Granddaughters kitchen](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Kitchen-by-Cornflowers-1024x765.jpg)
Kitchen by Cornflowers
Granddaughters kitchen
![Hand made tools using scraps of beach to make a 45deg edge chafer plane from a vintage rebate plane. A scratch stock. Paul's rebate plane again scrap beach and 3/4 firmer chisel. 2 really good routers, one adjustable. I can cut a stopped housing in a couple of min. No noise no dust.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Handmade-Tools-by-John-2v-1024x765.jpg)
Handmade Tools by John 2v
Hand made tools using scraps of beach to make a 45deg edge chafer plane from a vintage rebate plane. A scratch stock. Paul’s rebate plane again scrap beach and 3/4 firmer chisel. 2 really good routers, one adjustable. I can cut a stopped housing in a couple of min. No noise no dust.
![The Prosopis Nigra log (algarrobo negro) was going to be firewood... and really happy with it! Now that wood is going to last for much longer than a few hours...](https://woodworkingmasterclasses.com/wp-content/uploads/2018/03/Malis-Lounge-Chair-by-Sebastian-768x1024.jpg)
Mali’s Lounge Chair by Sebastian
The Prosopis Nigra log (algarrobo negro) was going to be firewood… and really happy with it! Now that wood is going to last for much longer than a few hours…
![Night Stand Table by Danny Marchese](https://woodworkingmasterclasses.com/wp-content/uploads/2018/04/Night-Stand-Table-by-Danny-Marchese-1024x768.jpg)
Night Stand Table by Danny Marchese
![I used ash and walnut to make this paneled blanket chest. All the materials were one inch thick. The bottom was drop in and held in place by cleats that it was attached to with screws. The joinery was primarily mortise and tenon. For the finish I used 2-3 coats of clear Danish oil so the natural colors of the wood could show through.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/04/Blanket-Chest-by-Chuck-Brack-1024x768.jpg)
Blanket Chest by Chuck Brack
I used ash and walnut to make this paneled blanket chest. All the materials were one inch thick. The bottom was drop in and held in place by cleats that it was attached to with screws. The joinery was primarily mortise and tenon. For the finish I used 2-3 coats of clear Danish oil so the natural colors of the wood could show through.
![Everyday Cabinet by andrewbrunsdon](https://woodworkingmasterclasses.com/wp-content/uploads/2018/04/Everyday-Cabinet-by-andrewbrunsdon-768x1024.jpg)
Everyday Cabinet by andrewbrunsdon
Made from pine and finished with chalk paint, Shellac and wax. Top is silvertop ash.
![Reclaimed pallets don't always have to look cheap. Poplar with English Chestnut stain.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Floating-Shelf-by-David-Paulk-1024x768.jpg)
![This is a wall cabinet I made for one of my high school teachers as a graduation gift. It's made from oak and walnut and finished with danish oil and wax.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Wall-Cabinet-by-Bryson-Hillis-e1525355192304-768x1024.jpg)
Wall Cabinet by Bryson Hillis
This is a wall cabinet I made for one of my high school teachers as a graduation gift. It’s made from oak and walnut and finished with danish oil and wax.
![I used a piece of flamed meranti, finished with pure tung oil.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Burger-FlipperSpatula-in-Meranti-by-btyreman-669x1024.jpg)
![Made in Tasmanian Oak this shoe rack has no fewer than 30 mortise and tenon joints - great practice! This wood stains well with a simple clear varnish and widely available in Bunnings in Australia](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Shoe-Rack-by-Brian-D.jpg)
Shoe Rack by Brian D
Made in Tasmanian Oak this shoe rack has no fewer than 30 mortise and tenon joints – great practice! This wood stains well with a simple clear varnish and widely available in Bunnings in Australia
![Baby cradle made from discarded maple pallets](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Cradle-by-Jeff-Christian-Rogers-1024x678.jpg)
Cradle by Jeff & Christian Rogers
Baby cradle made from discarded maple pallets
![Cherry Quilt Chest with Walnut inlay and Mahogany door frames](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Quilt-Cabinet-by-Chris-Stasny-768x1024.jpg)
Quilt Cabinet by Chris Stasny
Cherry Quilt Chest with Walnut inlay and Mahogany door frames
![Based on Paul Sellers' Tool Cupboard - Lower Unit Blog post](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Bathroom-Vanity-by-Arthur-Coates-1024x768.jpg)
Bathroom Vanity by Arthur Coates
Based on Paul Sellers’ Tool Cupboard – Lower Unit Blog post
![Poplar and pine](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Shooting-Board-by-André-e1527684907185-768x1024.jpg)
Shooting Board by André
Poplar and pine
![The sides and middle top shelf are from Sepele and the bottom shelf is from cherry.The hooks on the side are from a combination of oak and walnut. also all the stops are from walnut. If you want to see full build cycle you can visit my website at https://www.thekerfworkshop.com/thekerfworkshop](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Turntable-Stand-by-Danny-Marchese-768x1024.jpg)
Turntable Stand by Danny Marchese
The sides and middle top shelf are from Sepele and the bottom shelf is from cherry.The hooks on the side are from a combination of oak and walnut. also all the stops are from walnut. If you want to see full build cycle you can visit my website at https://www.thekerfworkshop.com/thekerfworkshop
![I made this for my daughter and son-in-law as a housewarming gift. It slides into a tv bench that he and I made together. It’s made out of yellow cedar that I hand -milled and then planed up to finish dimensions. A lovely project, which was great fun. I never would have tried such a thing a year ago- THANKS, Paul for all your patient teachings.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/05/Controller-and-Cable-Home-by-Ian-Hemphill-1024x695.jpg)
Controller and Cable Home by Ian Hemphill
I made this for my daughter and son-in-law as a housewarming gift. It slides into a tv bench that he and I made together. It’s made out of yellow cedar that I hand -milled and then planed up to finish dimensions. A lovely project, which was great fun. I never would have tried such a thing a year ago- THANKS, Paul for all your patient teachings.
![My first project using no screws](https://woodworkingmasterclasses.com/wp-content/uploads/2018/06/Foot-Rest-by-Amir-Mostaan-1024x768.jpg)
Foot Rest by Amir Mostaan
My first project using no screws
![A very fun project albeit a most useful one. Pine off cuts distressed painted with a carved robin perched. Key safe inside for housekeeper and dog sitter.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Keysafe-Birdhouse-by-Kurt-Schultz-768x1024.jpeg)
Keysafe Birdhouse by Kurt Schultz
A very fun project albeit a most useful one. Pine off cuts distressed painted with a carved robin perched. Key safe inside for housekeeper and dog sitter.
![Legs and bottom are black walnut. The sides are oak. My first project of my own design.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Dresser-Caddy-by-Jonathan-Rahall-1024x768.jpg)
Dresser Caddy by Jonathan Rahall
Legs and bottom are black walnut. The sides are oak. My first project of my own design.
![Faux-jacobian frame-and-panel blanket chest in oak sized for baby blankets as a gift for a coworker who'd just had his first child. Drawbored mortise and tenon joints, low relief carving, tongue-and-grooved cedar base, finished with Osmo wood wax and beeswax.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Baby-Blanket-Chest-by-Mark-Dennehy-1024x683.jpg)
Baby Blanket Chest by Mark Dennehy
Faux-jacobian frame-and-panel blanket chest in oak sized for baby blankets as a gift for a coworker who’d just had his first child. Drawbored mortise and tenon joints, low relief carving, tongue-and-grooved cedar base, finished with Osmo wood wax and beeswax.
![Small desk shelf in american black walnut with sycamore stringing in a line-and-berry style, poplar feet with walnut stringing. Finished with osmo wood wax and renaissance wax.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Desk-Shelf-by-Mark-Dennehy-683x1024.jpg)
Desk Shelf by Mark Dennehy
Small desk shelf in american black walnut with sycamore stringing in a line-and-berry style, poplar feet with walnut stringing. Finished with osmo wood wax and renaissance wax.
![Small desk shelf in american black walnut. Carved endgrain and cut nails as decorative elements. Finished in button shellac.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Desk-Shelf-2-by-Mark-Dennehy-1024x683.jpg)
Desk Shelf by Mark Dennehy
Small desk shelf in american black walnut. Carved endgrain and cut nails as decorative elements. Finished in button shellac.
![just a humble stand for laundry baskets, made from one 1x8 common pine board 6ft long](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Utility-Stand-by-Bob-Blarney-778x1024.jpg)
Utility Stand by Bob Blarney
just a humble stand for laundry baskets, made from one 1×8 common pine board 6ft long
![Different take inspired by Paul’s tool cabinet. Made from cherry.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Wine-Cabinet-by-Chris-1024x1024.jpeg)
Wine Cabinet by Chris
Different take inspired by Paul’s tool cabinet. Made from cherry.
![stained poplar with shellac then polyurethane for my child to use to reach sink; design from Fine Woodworking](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Step-Stool-by-Joe-576x1024.jpg)
Step Stool by Joe
stained poplar with shellac then polyurethane for my child to use to reach sink; design from Fine Woodworking
![Little furniture to hide my electrical panel (fir, okoumé, american walnut).](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Electrical-Panel-Cabinet-by-Emmanuel-Olive-e1532533184242-576x1024.jpg)
Electrical Panel Cabinet by Emmanuel Olive
Little furniture to hide my electrical panel (fir, okoumé, american walnut).
![Mortise gauge made of sapele with an oak dowel. Pins are finish nails that were clipped and sharpened.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Mortise-Gauge-by-C.J.-Cole-1024x768.jpg)
Mortise Gauge by C.J. Cole
Mortise gauge made of sapele with an oak dowel. Pins are finish nails that were clipped and sharpened.
![My shop cupboard to house all of my finishing products as well as some sharpening oils.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Shop-Cupboard-by-Anthony-Greitzer-e1532961586899-577x1024.jpg)
Shop Cupboard by Anthony Greitzer
My shop cupboard to house all of my finishing products as well as some sharpening oils.
![My shop table houses a couple of large files and serves as a place for shop cupboard to rest. Both reside in one of the corners of my shop.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/07/Shop-Table-by-Anthony-Greitzer-e1532961862699-577x1024.jpg)
Shop Table by Anthony Greitzer
My shop table houses a couple of large files and serves as a place for shop cupboard to rest. Both reside in one of the corners of my shop.
![](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Coffee-and-Tea-Cupboard-by-Anthony-e1533114766542-scaled-577x1024.jpg)
Coffee and Tea Cupboard by Anthony
![Made in oak, finished with 2-3 coats of shellac and 2 coats of wax](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Lecturn-Bookcase-by-nljsellers-e1533649952945-scaled-768x1024.jpg)
Lecturn Bookcase by nljsellers
Made in oak, finished with 2-3 coats of shellac and 2 coats of wax
![Cabinet to hold wife's sewing machine accessories and supplies. White Oak, stained and glazed with waterborne finish.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Sewing-Drawers-by-Keith.jpg)
Sewing Drawers by Keith
Cabinet to hold wife’s sewing machine accessories and supplies. White Oak, stained and glazed with waterborne finish.
![Made from various off cuts of hard wood. Finishing to follow by customer](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Horse-Drawn-Trailer-by-rayc21-scaled-1024x768.jpeg)
![Oak and Red Elm end tables](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/End-Tables-by-harry-wheeler-scaled-1024x551.jpg)
End Tables by harry wheeler
Oak and Red Elm end tables
![A trio of tables. Made with hand tools posts were finished on the lathe. Customer to finish treating.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Tables-by-rayc21-e1533652636526-scaled-768x1024.jpeg)
Tables by rayc21
A trio of tables. Made with hand tools posts were finished on the lathe. Customer to finish treating.
![70 plus pieces of laminated reclaimed pine, light brown dye, red mahogany stain, satin water based finish](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Twin-Bed-by-Pope-Jones-1024x816.jpg)
Twin Bed by Pope Jones
70 plus pieces of laminated reclaimed pine, light brown dye, red mahogany stain, satin water based finish
![Made entirely from Thai “Mai Daeng” hardwood boards. Only available size 180*20mm finished. Very hard and difficult to work and extremely prone to tear out even with the sharpest tools. Worth it though when finished with fine grit paper and oiled with teak oil.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/ShoeGeneral-Storage-Cabinet-by-Jim-Munday-e1534245934817-scaled-765x1024.jpeg)
Shoe/General Storage Cabinet by Jim Munday
Made entirely from Thai “Mai Daeng” hardwood boards. Only available size 180*20mm finished. Very hard and difficult to work and extremely prone to tear out even with the sharpest tools. Worth it though when finished with fine grit paper and oiled with teak oil.
![A music stand for my wife. It is made of oak, The walnut inlay hides screws that fix the platen to the upright. The height adjuster is a (bought) rosewood viola tuning peg. All done with hand tools. Thank you Paul and team for giving me the confidence and knowledge to undertake it.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Music-Stand-by-Steve-Mees-scaled-768x1024.jpg)
Music Stand by Steve Mees
A music stand for my wife. It is made of oak, The walnut inlay hides screws that fix the platen to the upright. The height adjuster is a (bought) rosewood viola tuning peg. All done with hand tools. Thank you Paul and team for giving me the confidence and knowledge to undertake it.
![A craft table which was based on a recent post in Paul’s blog. Using picture frame technique, secured the frame for the base. Currently used (and loved) by my wife for her diamond painting hobby...no more cramped neck!](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Adjustable-Angled-Craft-Table-by-Kurt-Schultz-1024x768.jpeg)
Adjustable Angled Craft Table by Kurt Schultz
A craft table which was based on a recent post in Paul’s blog. Using picture frame technique, secured the frame for the base. Currently used (and loved) by my wife for her diamond painting hobby…no more cramped neck!
![Ultra light (less than 3#) step stool dovetailed, made of pine with milk paint and water-based urethane finish. In the kitchen to reach the upper shelves. Photo bombed by dog!](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Hanging-Shaker-Stool-by-Kurt-Schultz-scaled-768x1024.jpeg)
Hanging Shaker Stool by Kurt Schultz
Ultra light (less than 3#) step stool dovetailed, made of pine with milk paint and water-based urethane finish. In the kitchen to reach the upper shelves. Photo bombed by dog!
![Pine carcass with plywood panel on hinges that allow for storage underneath. French cleated on wall](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Hand-Plane-Storage-Cabinet-by-Kurt-Schultz-768x1024.jpeg)
Hand Plane Storage Cabinet by Kurt Schultz
Pine carcass with plywood panel on hinges that allow for storage underneath. French cleated on wall
![Swedish redwood planed from rough sawn boards. Mortice and tenon with pegs aprons to legs](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Garden-Table-by-Tony-from-Aberdeenshire-scaled-1024x768.jpeg)
Garden Table by Tony from Aberdeenshire
Swedish redwood planed from rough sawn boards. Mortice and tenon with pegs aprons to legs
![Plane renovation](https://woodworkingmasterclasses.com/wp-content/uploads/2018/08/Plane-Renovation-by-Tony-Kelly-scaled-1024x768.jpg)
Plane Renovation by Tony Kelly
![I couple of years now, I am trying to set up, organize a work space.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/09/Workshop-by-Theophilus-Georgandas-1024x576.jpg)
Workshop by Theophilus Georgandas
I couple of years now, I am trying to set up, organize a work space.
![Numismatic coin cabinet. Used mahogany, maple, cocobolo drawer pulls and brass drawer pulls.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/09/Coin-Cabinet-by-Jake-Gevorgian-scaled-681x1024.jpeg)
Coin Cabinet by Jake Gevorgian
Numismatic coin cabinet. Used mahogany, maple, cocobolo drawer pulls and brass drawer pulls.
![White Oak bench with storage under the seats. 64" long, 17" deep and 19" high. This was built to accompany a dining table I made a few years ago. Finished in blond shellac.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/09/Dining-Table-bench-by-NikonD80-scaled-1024x768.jpg)
Dining Table bench by NikonD80
White Oak bench with storage under the seats. 64″ long, 17″ deep and 19″ high. This was built to accompany a dining table I made a few years ago. Finished in blond shellac.
![Solid Pine construction, painted apron and legs, with a whitewash top then clear coat varnish.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/09/Dining-Table-by-philvogt-scaled-1024x467.png)
Dining Table by philvogt
Solid Pine construction, painted apron and legs, with a whitewash top then clear coat varnish.
![This is a shaker inspired book case/ thing to put stuff on. Made from white oak with poplar accents, 4 coats of shellac and a coat of pale furniture wax. The oak changed quite a bit during the build and will definitely do a prototype next time round. First time using oak in a larger scale project and it was bloody hard.!](https://woodworkingmasterclasses.com/wp-content/uploads/2018/09/Shaker-inspired-Shelves-by-Nat-Jones-683x1024.jpeg)
Shaker-inspired Shelves by Nat Jones
This is a shaker inspired book case/ thing to put stuff on. Made from white oak with poplar accents, 4 coats of shellac and a coat of pale furniture wax. The oak changed quite a bit during the build and will definitely do a prototype next time round. First time using oak in a larger scale project and it was bloody hard.!
![An adaptation of the fly swat made into a back scratcher. Upcycled hickory broom handle laminated with walnut. Maple paw with walnut claws. Shaped with a spoke shave, 10 grain rasp and a file.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Back-Scratcher-by-Kurt-Schultz-768x1024.jpeg)
Back Scratcher by Kurt Schultz
An adaptation of the fly swat made into a back scratcher. Upcycled hickory broom handle laminated with walnut. Maple paw with walnut claws. Shaped with a spoke shave, 10 grain rasp and a file.
![Red Oak finished in semi-gloss varnish](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Mantel-Clock-by-Steve-Goodwin.jpg)
Mantel Clock by Steve Goodwin
Red Oak finished in semi-gloss varnish
![I built this base for our old cast iron farm sink. The legs are walnut with the rest of the cabinet being butternut. At this point it has no finish. The 24 mortise and tenon joints gave me lots of practice. Being able to watch various episodes as I was making those joints, the panels and the doors was a huge help.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Kitchen-Sink-Based-Cabinet-by-donhatch-1024x909.jpeg)
Kitchen Sink Base Cabinet by donhatch
I built this base for our old cast iron farm sink. The legs are walnut with the rest of the cabinet being butternut. At this point it has no finish. The 24 mortise and tenon joints gave me lots of practice. Being able to watch various episodes as I was making those joints, the panels and the doors was a huge help.
![a spoon is a spoon](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Six-Spoons-by-phillnleblanc-scaled-1024x768.jpg)
Six Spoons by phillnleblanc
a spoon is a spoon
![An old style hollowed out box. Decorations show which grit will be exposed. Finger grips to open friction fit box which also provide access to sharpen router irons. Overhangs set up plane irons for eclipse. Cutouts do same for chisels. Two ends provide primary and secondary bevel. Leather strop stored inside.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Diamond-Stone-Storage-Box-by-Jim-Baker-scaled-1024x576.jpg)
Diamond Stone Storage Box by Jim Baker
An old style hollowed out box. Decorations show which grit will be exposed. Finger grips to open friction fit box which also provide access to sharpen router irons. Overhangs set up plane irons for eclipse. Cutouts do same for chisels. Two ends provide primary and secondary bevel. Leather strop stored inside.
![I got the idea after seeing an awl that Paul had. I made the handle out of a 1.25" dowel that I planed to 8 sides then turned on my mini lathe. I made the ferrule from a brass fitting and the square awl from a 3.5" hardened masonry nail. I first annealed the nail, then shaped it with files and sandpaper. I then hardened in with oil quenching and then tempered at 400F in a toaster oven. To get the name like Paul had on his handle, I just laser printed out my name in mirror image then placed on a wetted side with clear waterbased polyurethane. I let dry then put water on it and lightly rubbed the paper off leaving the name.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Square-Awl-by-Dave-Robbie-scaled-1024x768.jpg)
Square Awl by Dave Robbie
I got the idea after seeing an awl that Paul had. I made the handle out of a 1.25″ dowel that I planed to 8 sides then turned on my mini lathe. I made the ferrule from a brass fitting and the square awl from a 3.5″ hardened masonry nail. I first annealed the nail, then shaped it with files and sandpaper. I then hardened in with oil quenching and then tempered at 400F in a toaster oven. To get the name like Paul had on his handle, I just laser printed out my name in mirror image then placed on a wetted side with clear waterbased polyurethane. I let dry then put water on it and lightly rubbed the paper off leaving the name.
![Knife and fork drawer](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Knife-and-Fork-Drawer-by-Stefaan-Verweirder-768x1024.jpeg)
Knife and Fork Drawer by Stefaan Verweirder
![This is the corner of a half-blind dovetail made from pine. I'm making four drawers with half-blinds. In preparation, I've been practicing with cut-offs from past projects.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Shop-Dresser-Preparation-by-Anthony-Greitzer-e1540996168734-scaled-577x1024.jpg)
![Made from Redwood.....finish yet to be determined.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Bench-with-storage-by-David-Barker-885x1024.jpg)
Bench with storage by David Barker
![Made from Redwood.....finish yet to be determined.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Bench-with-storage-2-by-David-Barker-e1540997894819-scaled-498x1024.jpg)
Made from Redwood…..finish yet to be determined.
![Built of red oak with western big leaf maple secondary wood. Sized to take full sheets of watercolour paper.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Artist-Paper-Storage-Chest-by-Don-Nelson-scaled-1024x684.jpg)
Artist Paper Storage Chest by Don Nelson
Built of red oak with western big leaf maple secondary wood. Sized to take full sheets of watercolour paper.
![Built in oak with jaws lined with thin leather following Greg Merritt design](https://woodworkingmasterclasses.com/wp-content/uploads/2018/10/Saw-Vice-by-Ian-Lambert-scaled-1024x576.jpg)
Saw Vice by Ian Lambert
Built in oak with jaws lined with thin leather following Greg Merritt design
![Walnut and Maple cutting board](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Cutting-Board-by-bruce-spencer-1024x1024.jpg)
Cutting Board by bruce spencer
Walnut and Maple cutting board
![Made from Cherry with a two way bookmatched burr Walnut veneer panel on the lid, surrounded by Boxwood stringing. Finish is Danish oil](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Memory-Box-by-Stewart-Hardwick-1024x683.jpg)
Memory Box by Stewart Hardwick
Made from Cherry with a two way bookmatched burr Walnut veneer panel on the lid, surrounded by Boxwood stringing. Finish is Danish oil
![New poplar wood made to look ancient](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Crib-by-Phil-Guthe-scaled-1024x768.jpg)
Crib by Phil Guthe
New poplar wood made to look ancient
![Oak, finished in boiled linseed oil](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Milking-Stool-by-Stewart-Hardwick-scaled-1024x895.jpg)
Milking Stool by Stewart Hardwick
Oak, finished in boiled linseed oil
![Locust Mallet, really enjoyed Pauls mallet video. This one was easy to make, only needed 1) 3" x10" branch and a few hand tools.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Locust-Mallet-by-Harold-K-e1542724006159-scaled-768x1024.jpg)
Locust Mallet by Harold K
Locust Mallet, really enjoyed Pauls mallet video. This one was easy to make, only needed 1) 3″ x10″ branch and a few hand tools.
![This is the first plane I've made. The wedge is ugly, the chisel is rusty, but boy does it work! I used a section of an old wooden level as the plane body, not sure of the wood. Maybe rosewood? Also pictured is the poor man's router used in the project. Thanks so much to WWMC team for putting such great info out there!](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Poor-Mans-Rebate-Plane-by-L.-Juday-scaled-1024x768.jpg)
Poor Man’s Rebate Plane by L. Juday
This is the first plane I’ve made. The wedge is ugly, the chisel is rusty, but boy does it work! I used a section of an old wooden level as the plane body, not sure of the wood. Maybe rosewood? Also pictured is the poor man’s router used in the project. Thanks so much to WWMC team for putting such great info out there!
![Made of Pine, finished with stain.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Poor-Mans-Rebate-Plan-by-Amir-Kh-1024x614.jpg)
Poor Man’s Rebate Plan by Amir Kh
Made of Pine, finished with stain.
![Red oak and red oak plywood. Mostly used jointer, smoother and hand-router. Craftsman style faced drawers and panels. Drawers are made of 1/2 Russian Birch. Finish is stain and tungsten oil.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/11-drawer-sewing-cabinets-by-James-Jones-scaled-1024x768.jpeg)
11 drawer sewing cabinets by James Jones
Red oak and red oak plywood. Mostly used jointer, smoother and hand-router. Craftsman style faced drawers and panels. Drawers are made of 1/2 Russian Birch. Finish is stain and tungsten oil.
![Two bowl scrapers, walnut from the scrap pile. Beeswax+mineral oil finish.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/11/Bowl-Scrapers-by-Rob-Young.jpg)
Bowl Scrapers by Rob Young
Two bowl scrapers, walnut from the scrap pile. Beeswax+mineral oil finish.
![quarter sawn white oak with commercial inlay finished with shellac and then wax. Was inspired to make these after seeing Paul's inlay bookmark video.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/12/Inlay-Crosses-as-Christmas-Gifts-by-joeleonetti-1024x768.jpg)
Inlay Crosses as Christmas Gifts by joeleonetti
quarter sawn white oak with commercial inlay finished with shellac and then wax. Was inspired to make these after seeing Paul’s inlay bookmark video.
![American Walnut and basswood interior.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/12/Box-For-Essential-Oils-by-steve-scaled-1024x768.jpg)
Box For Essential Oils by steve
American Walnut and basswood interior.
![Maple leg and birch Rounds tiered table](https://woodworkingmasterclasses.com/wp-content/uploads/2018/12/Tiered-Table-by-Patrick-Sadr-e1544719737965-scaled-576x1024.jpg)
Tiered Table by Patrick Sadr
Maple leg and birch Rounds tiered table
![Maple and walnut serving tray](https://woodworkingmasterclasses.com/wp-content/uploads/2018/12/Small-Serving-Tray-by-Jesse-Terpstra-e1544719933448-1024x576.jpg)
Small Serving Tray by Jesse Terpstra
Maple and walnut serving tray
![Inspired by bandsaw boxes on web, but made by hand tools only.. Made of beech, ash and plum wood.](https://woodworkingmasterclasses.com/wp-content/uploads/2018/12/Jewel-Box-by-Jan-Skorepa.jpg)
Jewel Box by Jan Skorepa
Inspired by bandsaw boxes on web, but made by hand tools only.. Made of beech, ash and plum wood.
![Transition headboard/footboard to bench](https://woodworkingmasterclasses.com/wp-content/uploads/2018/12/Bench-by-Phil-Guthe-scaled-1024x710.jpg)
Bench by Phil Guthe
Transition headboard/footboard to bench
![Saw Till to store my saws](https://woodworkingmasterclasses.com/wp-content/uploads/2018/12/Saw-Till-by-wtwegner-768x1024.jpg)
Saw Till by wtwegner
Saw Till to store my saws
![The Oak came from two Stair spindles left over from a previous project and the ply was rescued from a builders tip. I gave the piece three coats of water based varnish. It's a Christmas present for my Mum who always forgets where she put her walking stick.](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Umbrella-Stand-by-Jon-Place-e1546947056256-scaled-768x1024.jpg)
Umbrella Stand by Jon Place
The Oak came from two Stair spindles left over from a previous project and the ply was rescued from a builders tip. I gave the piece three coats of water based varnish. It’s a Christmas present for my Mum who always forgets where she put her walking stick.
![Walnut box I made for my daughter's sweet 16.](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Keepsake-Box-by-Kalman-Grof-Tisza-scaled-768x1024.jpg)
Keepsake Box by Kalman Grof-Tisza
Walnut box I made for my daughter’s sweet 16.
![Pine. Oil finish.](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Oilstone-Box-by-Benoît-Thomoux-scaled-1024x768.jpeg)
Oilstone Box by Benoît Thomoux
Pine. Oil finish.
![I built these two planter stands as a housewarming gift for my elder daughter, to celebrate their purchase of their first apartment. Here in Vancouver, that’s quite an accomplishment. Needed something small but personal. These are cherry, mortise and tenon legs and a half-lap in the crosspiece. Thanks for teaching me how to do these things, Paul!](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Planter-Stands-by-Ian-Hemphill-e1546948806509-scaled-1024x1024.jpeg)
Planter Stands by Ian Hemphill
I built these two planter stands as a housewarming gift for my elder daughter, to celebrate their purchase of their first apartment. Here in Vancouver, that’s quite an accomplishment. Needed something small but personal. These are cherry, mortise and tenon legs and a half-lap in the crosspiece. Thanks for teaching me how to do these things, Paul!
![After setting up my bandsaw for recutting, I ended up with a large stack of nice thin maple blanks just right for some small-box dovetailing practice. So I thought I’d combine that with the Christmas season and make some gift boxes to hold our homemade jams and dried herbs from our garden. Made seven boxes, with dovetailed corners, a shaped front and an inset bottom. Got lot of practice with some useful techniques from Paul’s videos, and some nice prezzies as a bonus. Thanks for all the inspiration, Paul!](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Gift-Box-by-Ian-Hemphill-e1546952393153-scaled-1024x768.jpeg)
Gift Box by Ian Hemphill
After setting up my bandsaw for recutting, I ended up with a large stack of nice thin maple blanks just right for some small-box dovetailing practice. So I thought I’d combine that with the Christmas season and make some gift boxes to hold our homemade jams and dried herbs from our garden. Made seven boxes, with dovetailed corners, a shaped front and an inset bottom. Got lot of practice with some useful techniques from Paul’s videos, and some nice prezzies as a bonus. Thanks for all the inspiration, Paul!
![I dont know what is the wood I would like to know aswell it was a narrow tree we fell. I finished this one with tung oil.](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Cam-Clamp-by-michael-hötti-scaled-1024x765.jpg)
Cam Clamp by michael hötti
I dont know what is the wood I would like to know aswell it was a narrow tree we fell. I finished this one with tung oil.
![Made this for my wife for Christmas. Wood is Black Walnut from her brother's woods, Tiger Striped Maple from our place, Mahogany from South America given to me by a friend, and Lyptus that I purchased to finish it off.](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Chair-side-Table-by-Jim-Light-scaled-768x1024.jpg)
Chair-side Table by Jim Light
Made this for my wife for Christmas. Wood is Black Walnut from her brother’s woods, Tiger Striped Maple from our place, Mahogany from South America given to me by a friend, and Lyptus that I purchased to finish it off.
![Walnut and (either cherry or birch, other?, not sure) with basswood kumiko pattern inset on top.](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Burial-Urn-by-Michael-Campbell-1024x768.png)
Burial Urn by Michael Campbell
Walnut and (either cherry or birch, other?, not sure) with basswood kumiko pattern inset on top.
![A spin on a self standing spine shelf for my brothers shoe collection. Everything is pine except the western red cedar post, put on two coats of wipe-on poly for a quick finish. Used only hand tools, except to cut all shelves to length which I used a radial arm saw for. Fun project and could be used for many other things other than shoes!](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Shoe-Rack-by-Kaleb-e1546960119316-scaled-768x1024.jpg)
Shoe Rack by Kaleb
A spin on a self standing spine shelf for my brothers shoe collection. Everything is pine except the western red cedar post, put on two coats of wipe-on poly for a quick finish. Used only hand tools, except to cut all shelves to length which I used a radial arm saw for. Fun project and could be used for many other things other than shoes!
![hand carved bowl in lime and spoon in oak](https://woodworkingmasterclasses.com/wp-content/uploads/2019/01/Hand-Carved-Bowl-and-Spoon-by-Luca-Taylor-age-12-768x1024.jpg)
Hand-Carved Bowl and Spoon by Luca Taylor age 12
hand carved bowl in lime and spoon in oak
![Coffee Table by Kevin Bowkett](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/20150831_171710-e1445301245514-576x1024.jpg)
Coffee Table by Kevin Bowkett
Coffee Table inspired by Paul’s FootStool and breadboard Series. Made out of Walnut and Cherry. Unfortunately, I didn’t get the leg alignment right 🙁 but still I’m pleased with how its finished.
![Traveling Scotch Bar by Chris](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_1741-1024x768.jpg)
Traveling Scotch Bar by Chris
I used a combination of construction techniques from Paul’s Tool Chest as well as several housing dados for the interior. The idea to make this came from a flimsy, mass produced globe bar a friend had purchased. After looking around for something better, I found something similar to this and decided to give it a try. Thanks Paul! I couldn’t have done it without you. It is made from red oak which has been stained with a final finish of shellac
![Small table by Antonia](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/20140926_0917151-e1413986675851-768x1024.jpg)
Small table by Antonia
small table inspired on the three legged stool from the artisan course. The wood is pine, the tabletop is finished with linseedoil and reddish pigments. sizes: hight 440 mm, tabletop 415mm x115mm x10mm. I made it a few years ago for my friend who asked for a small table by a low chair. thanks Paul for your inspiration. Antonia
![Laptop Desk by George Fulford](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Laptop-Desk-4-1024x768.jpg)
Laptop Desk by George Fulford
I designed this to be a multi-purpose desk to use while laying in bed or on the couch. Oak frame with alternating oak/sycamore desktop and purpleheart banding.
![Bookshelf by David Kemp](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/book-shelf-433x1024.jpg)
Bookshelf by David Kemp
Bookshelf project from Paul’s Working Wood 1 and 2 book. Constructed from Birch and finished with a home made wiping varnish
![Small yard table by mikeprutz](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_20140928_161201-1024x768.jpg)
Small yard table by mikeprutz
$7 2×4 solution for the wife. 19″H x 12″W redwood with polyurathane finish
![Reclaimed wood hallway bench by Nir B](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/mb5.jpg)
Reclaimed wood hallway bench by Nir B
Reclaimed wood hallway bench
![Clothes hanger I by Vargha Gyula](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/01-680x1024.jpg)
Clothes hanger I by Vargha Gyula
![Clothes hanger II by Vargha Gyula](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/02-1024x680.jpg)
Oak and wrought iron combination hard oil wax finishing
![Sofa table by Mick Mercer](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image1-768x1024.jpg)
Sofa table by Mick Mercer
Sofa table made to size for friends lobby, in ash
![Spanish Bargueno by Orestes Valella](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Bargueno-1-1024x883.jpg)
Spanish Bargueno by Orestes Valella
Traditional chest in cherry with a shellac and wax finish.
![Powder Room Vanity by Orestes Valella](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/side-view-powder-room-vanity-768x1024.jpg)
Powder Room Vanity by Orestes Valella
sink cabinet in white oak with a shellac finish for the sides, wipe on poly for the top.
![Garden bench with oak by Vargha Gyula](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/kanape-1024x768.jpg)
Garden bench with oak by Vargha Gyula
Garden bench with oak
![Long Board by John Moore](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/LongBoardK-1-1024x680.jpg)
Long Board by John Moore
My 17 year old daughter wanted a long board, so I suggested that we should just make one. We bought rough sawn lumber, using hand tools we cut, planed, and glue-up an over sized panel. Then finished the final shaped with chisels, #4 smoothing plane (for the round overs), and scrapers. We used shellac to seal the hickory, mahogany, and basswood. Then used oil-based out door poly to add protection.
![Bedside Cabinet by Ian](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/P1010311-1024x576.jpg)
Bedside Cabinet by Ian
Oak frames and top. Ash t&g panels
![mahogany trestle table by Orestes valella](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Hall-Trestle-table-768x1024.jpg)
mahogany trestle table by Orestes valella
Mahogany hall trestle table
![Small Three Drawer Chest by Greg Merritt](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_06082-1024x768.jpg)
Small Three Drawer Chest by Greg Merritt
Pine, sassafras finished with salmon milk paint, shellac and wax.
![Shadow Box by harshdoug](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/2012-12-30-07.23.13-768x1024.jpg)
Shadow Box by harshdoug
Built for my wifes grandfather to house his medals from World War II
![Shooting Board by Pasquale Avocone](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/20130919_161317.jpg)
Shooting Board by Pasquale Avocone
My first shooting board, it works well. Don’t know the wood but its a hard wood. I used my hand Router for the first time on this project.
![DVD Storage Cabinet by Ken Haygarth](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Photo0037-768x1024.jpg)
DVD Storage Cabinet by Ken Haygarth
DVD Storage Cabinet. Made from redwood pine.
![Driveway Gates by Eddy Flynn](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/gates-006-1024x768.jpg)
Driveway Gates by Eddy Flynn
A pair of driveway gates made from 5 x 2 par pine and t&g. These gates were made using half lap joinery before being taught the art of mortice and tenon joints. The front of the gates got at least 3 coats of 5 year wood stain while the back only got 2 coats. They have been built for five years now these were my fist project and still they work just fine.
![Saw Sharpening Vise by Greg Merritt](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0487-768x1024.jpg)
Saw Sharpening Vise by Greg Merritt
White oak, stain and shellac
![Carved Spoons and Rack by Greg Merritt](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0652-1024x768.jpg)
Carved Spoons and Rack by Greg Merritt
Green wild cherry spoons and pine rack
![Marking Gauge by Greg Merritt](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0508-1024x768.jpg)
Marking Gauge by Greg Merritt
Hard wood (beach?) wedge lock, one hand operation
![Spoon by John Moore](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/foggymorning-125-1024x680.jpg)
Spoon by John Moore
My family recently returned from vacation in the Smokey Mountains(NC, USA). While there, they bought firewood to heat the cabin. My Uncle saw the fresh cut walnut and brought me back 4 pieces. I made this spoon that night. It was very wet, so I am letting it dry out before smoothing it out. P.S. My other hobby is photography.
![Pine Chest of Drawers by Caleb Pendleton](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_5856-1024x653.jpg)
Pine Chest of Drawers by Caleb Pendleton
A client commissioned me to make this chest of drawers. The drawers are dovetail, the drawer rails are mortis and tenon and the bottom of the drawers and back are panels.
![Plane storage by Eddy Flynn](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/plane-tidy-768x1024.jpg)
Plane storage by Eddy Flynn
plane storage made from 18mm scrap it was a great project for practicing housing dado’s as it contains 12 of them
![dovetail box(pine) by David O'Sullivan](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/DSCF0682-1024x768.jpg)
dovetail box(pine) by David O’Sullivan
my son need a box for school books to leave in school .the plastic ones kept breaking
![Drop Leaf Table by Greg Merritt](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0718-1024x768.jpg)
Drop Leaf Table by Greg Merritt
Pine and cherry with a barn red milk paint stain, shellac and wax.
![Humidor by Terry Phillips](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0978-1024x768.jpg)
Humidor by Terry Phillips
Splined mitered box with raised top . Made from Walnut, Tulip wood, Maple, Wenge .and lined with Spanish cedar.
![Marking Gauge by David Gill](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_2135-1024x768.jpg)
Marking Gauge by David Gill
Made from Mahogany Finished in Shellac and waxed Blade made from Jig saw blade
![Spoons for gifts by nljs](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/P1060398-1024x768.jpg)
Spoons for gifts by nljs
Made from English Oak
![Cherry Spatulas by Matt Hess](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/spat-1024x768.jpg)
![Spoonology by Gavin Sykes](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0736-1024x768.jpg)
Spoonology by Gavin Sykes
The timber is Coastal Sheoak, native to Western Australia , the piece being branch material from a tree I felled in a customers backyard that was set aside to air dry for later use. The main trunk I think will prove to have some very nice material for larger projects. The grain is quite dense and a little interlocking but rewarding with its figure. The only gouge I had at hand was about seven mm but being inspired I made do and shaped a scraper from a piece of offcut construction grade steel which worked surprisingly well. I experimented with the handle to see if something more ergonomic for an elderly person would make any difference, so far the response has been positive.
![Toy Box by Eddy Flynn](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/toybox-4-1024x768.jpg)
![Toolbox by Nir B](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/jtb-1024x729.jpg)
Toolbox by Nir B
Japanese style toolbox Made of Pine wood scraps
![Walnut Spoon With Cutting Board by John Moore](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Walnut-Spoon-Cutting-Board-1-1024x680.jpg)
Walnut Spoon With Cutting Board by John Moore
I posted a photo in the gallery earlier with this spoon unfinished on a stack of firewood I used. I incorporated some of that same walnut along with white oak, maple, and mahogany into the cutting board.
![Split-top Saw Bench by Jay](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMAG0060_BURST002-686x1024.jpg)
Split-top Saw Bench by Jay
Split-top Saw Bench, pine with Danish oil
![](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Aaron-Thomas-63-in-Cherry-Floor-Lamp-1.jpg)
Hand Turned Cherry Lamp by Aaron Thomas
I am a disabled United States Marine Corps combat veteran of Operation Iraqi Freedom and have found woodworking as a means of therapy and recovery. Several years ago I became extremely interested in woodturning in addition to flatwork and started to make wooden lamps on the only lathe I could afford, a Harbor Freight 12″ x 36″ wood lathe. Here, I have turned a lamp out of solid cherry and outfitted it with solid brass hardware. I’ve never been able to sell any of my lamps but I still make them nonetheless. In 2009 I lost everything because of my service but woodworking is slowly helping me to regain dignity and my own humanity. I hope others will enjoy my labor of love.
![Work Bench Stool by Salko Safic](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/P1120493-1024x768.jpg)
Work Bench Stool by Salko Safic
Not to be confused with Paul’s project, it’s made out of Hoop Pine it’s very strong yet easy on on hand tools. Also it is adjustable height a light coat of shellac was applied
![Shaker stool by Salko Safic](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/P1120551.jpg)
Shaker stool by Salko Safic
This one is made from Poplar stained with Elm and finished off with Antique Oil. It supposed to have a rustic look about it, also I tried to make a contrast between the joints but didn’t end looking the way I expected it to so it look like gaps but there aren’t any.
![Royal Mantle Clock by Salko](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0952-1024x768.jpg)
Royal Mantle Clock by Salko
This is the last of the Fijian Kauri I had, I placed the hinges on the outside as they were too large to be recessed in on the insiide. Unfortunately I can only post one pic of it but it has a back door. Hope you like it.
![Dressing Table with mirror by Salko](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/IMG_0953-1024x768.jpg)
Dressing Table with mirror by Salko
I used Radiata Pine typical home centre lumber, the top edge glued and morrtise and tenons throughout. Finally I finished it off with a Rose Mahogany spirit stain applied with a rag and lastly a few coats of satin varnish. Actually it turned out more like an eggshell than satin isomething you’d get out of minwax antique oil but thicker. Anyway this was a gift to my wife for her 23rd birthday.. Unfortunately I just can’t get a better pic.
![Chisel and Marking gauge holder by Pasquale Avocone](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/20140410_145402-768x1024.jpg)
Chisel and Marking gauge holder by Pasquale Avocone
Made this holder after seeing Pauls. Keeps the chisels and gauges at easy reach, and mobile. The sides and base are made from Jarrah, top and rail are oak i think.
![Walnut Scoop by John Moore](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Scoop23-2-1024x768.jpg)
Walnut Scoop by John Moore
I made several scoops following after Mr. Sellers youtube video. I changed it up a little bit here with this scoop made from walnut.
![Japanese lamp by Ian Lambert](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/P1010526-575x1024.jpg)
Japanese lamp by Ian Lambert
Japanese-style Lamp after Edward Turner’s design. Pitch Pine/Pine/JN Paper
![office supplies box by Orestes](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/office-supplies-box-768x1024.jpg)
office supplies box by Orestes
stationary box made from painted poplar and unfinished cherry.
![Mahogany Trestle table by Orestes Valella](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/Mahogany-Hall-Table-842x1024.jpg)
Mahogany Trestle table by Orestes Valella
Hall table in mahogany. (my first table)
![Traditional Japanese tool box by Orestes Valella](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/japanese-tool-box-768x1024.jpg)
Traditional Japanese tool box by Orestes Valella
Japanese tool box in unfinished poplar.
![Cabinet for books by Orestes Valella](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/cabinet-for-books-773x1024.jpg)
Cabinet for books by Orestes Valella
Cherry wood cabinet with an oiled finish.
![Child's bench by Fraser](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image-1-768x1024.jpg)
Child’s bench by Fraser
A small child’s bench made from European oak finished with shellac made for my twin nieces.
![House Number Plaque by Colin Whiting](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/HouseNumberInstalled-576x1024.jpg)
House Number Plaque by Colin Whiting
This is a house number plaque made for my girlfriend’s house, which is my first serious attempt at doing a mostly hand tools only woodworking project. The lighter coloured wood was recovered from a pallet, which I think is redwood, the edging and characters are made from mahogany. The lighter wood section is 3 pieces edge jointed together, with the mahogany border rebated, mitred and glued in place. The characters where made from the same piece of mahogany as the edging and were cut out using a scroll saw, hand finished and glued in place. Due to it being located outside it was finished with 3 generous coats of Danish Oil and mounted using keyhole plates rebated into the back.
![Coffe Table by Vargha Gyula](https://woodworkingmasterclasses.com/wp-content/uploads/2013/07/dióasztal-005-1024x768.jpg)
Coffe Table by Vargha Gyula
Walnut maple combination coffee table. Finishing Biopin hard oil wax. In the bowl of pebbles felicitation
![Bookcase by Orestes Valella](https://woodworkingmasterclasses.com/wp-content/uploads/2014/04/bookcase-767x1024.jpg)
Bookcase by Orestes Valella
Bookcase in red oak with an oil finish
![Hanukkah Menorah by joege85](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/20141216_075219-1024x576.jpg)
Hanukkah Menorah by joege85
I made this for all my fellow Jewish woodworkers! The project only took me a couple hours using Paul’s methods for shaping. The Menorah is made from mahogany, the spindle was shaped on a lathe the candle holder and base where shaped with spokeshaves and chisel. I hope you enjoy!
![Oak Marking Gauge Rack by Gary Blair](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/DSCN0099-1024x768.jpg)
Oak Marking Gauge Rack by Gary Blair
Marking/Mortise Gauge Rack. oak with tapered legs dovetailed into top, finished with clear shellac & wax
![Tall cupboard by Orestes Valella](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image2.jpg)
Tall cupboard by Orestes Valella
Cupboard cabinet made of pine and painted
![Hillbilly Tansu by Greg Merritt](https://woodworkingmasterclasses.com/wp-content/uploads/2014/11/hbt2-43-1024x1024.jpg)
Hillbilly Tansu by Greg Merritt
My own design in cherry, pine and birch ply. Hand tied “hardware” and kolrosing decoration.
![Garden bridge by wdelliott](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/001-1024x768.jpg)
Garden bridge by wdelliott
Redwood, arched garden bridge in Japanese Garden, in Texas
![Herb Cupboard by nljsellers](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/20150308_135507-1024x576.jpg)
Herb Cupboard by nljsellers
A small (60 x 65cm approx combined cupboard/shelf unit made from white pine, stained and waxed
![Shooting Board by Gary Blair](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/DSCN0170-1024x768.jpg)
Shooting Board by Gary Blair
1/2″ plywood base, ambrosia maple with oak wedges, and superslick polyethelyne bed for plane (Stanley 4 1/2 pictured)
![Shaker style table by Xavi Molina](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/la-foto-3-copia-e1426110873671-765x1024.jpg)
Shaker style table by Xavi Molina
Walnut shaker style side table. Wax finish.
![A dovetail chest on a budget (the 36 euro challange) by António Samagaio](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/DSCF3397.jpg)
A dovetail chest on a budget (the 36 euro challange) by António Samagaio
Pine, all glue with wood pegs (no nails) finished with lemon shellac and wax, everithing made from what I’ve learn on WWMC
![Shaker style workbench by davidb](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/P6050002-1024x766.jpg)
Shaker style workbench by davidb
Shaker style workbench. Hard Maple top, Curly Maple drawer fronts, Cherry, and Birdseye Maple trim.
![Hall table by Jimmy Chrisawn](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image3-1024x768.jpg)
Hall table by Jimmy Chrisawn
Red oak hall table based loosely on Paul’s sofa table project. Finished with mi wax golden pecan and wife on poly.
![End table by copeaux](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/petite-table-54.jpg)
End table by copeaux
Made poplar and cherry veneer wood finished with blond shellac and wax
![Doors for my Shed by Steve Follis](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/FinalShed-1024x768.jpg)
Doors for my Shed by Steve Follis
Doors made from Western Red Cedar, constructed with mortise and through, wedged tennons. The plans came from a reprint of the book Doormaking and Window-making, published by Lost Art Press.
![Simple spoon by J. Kobaly](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image4-768x1024.jpg)
Simple spoon by J. Kobaly
Made this cherry spoon for my wife this afternoon.
![Hall or foyer table by Jimmy Chrisawn](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image22-1024x768.jpg)
Hall or foyer table by Jimmy Chrisawn
Built around Paul’s sofa table project. Red oak with golden pecan stain and wipe on poly. All hand tools!
![Shooting board by Jimmy Chrisawn](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/image-11-e1438786082247-768x1024.jpg)
Shooting board by Jimmy Chrisawn
I’ve made a few of these over the last 45+years. This one from left over oak laminated. The knife wall is very definitive and accurate. I love to use a 41/2 for shooting.
![Mancala board by Rob Young](https://woodworkingmasterclasses.com/wp-content/uploads/2013/06/15713461199_ba8fd80d28_o.jpg)
Mancala board by Rob Young
African mahogany (Khaya) with orange shellac and dark wax finish. Added two magnets to hold board closed (pro-tip: pay attention to magnet polarity). Given as gift to 6yr old nephew who already plays the game at school on “board game days” when too cold to have recess outside.
Thank you to everyone who has sent a picture in!
If you would like to submit a picture to the gallery, please use the submissions form.