Forum Replies Created
-
AuthorPosts
-
31 March 2016 at 8:12 pm #136119
I went back and reviewed the back frame videos searching for an answer. I’m happy to ear that…
…The pleasure of waiting. ;-P
Thanks29 March 2016 at 5:45 pm #136082The previous owner took a flat file and grind it to an edge. It didn’t have the indexing slot on the back of it neither the increase in thickness.
In the set of blade I purchased, some of them are from the same maker. Either way, they all react the same now.
We can see on the second picture that the bed is lower on the right side that the other. So when I insert the wedge, the wedge is pressing the irons th the right. I was able to take some shavings from the wedge so it put less pressure on the right side. After a few try, it’s working great. The blades are now square.
The only other thing I see, and it’s difficult to look on picture, is that the blade rest more on the indexing skate that the bed. I’ll try to take a pitcure.
- This reply was modified 8 years, 1 month ago by Olivier Dumont-Pichette.
-
AuthorPosts