Forum Replies Created
-
AuthorPosts
-
26 April 2023 at 12:43 pm #799387
Hey everyone
I have tried all your suggestions they worked well.
I also tried to make a grooving plane myself i tried wood by wrights design and worthefforts version they worked reasonably wellBut after looking online i found a record 50 with all the irons so i can now make grooves and beads with ease.
Kind regards
28 March 2023 at 3:54 pm #796287Hey darren
I have tried this out.
And it worked really well.
But i have one other question will this technique still work wen the stock gets longer.
Because it will be very hard to balance your saw so do you or someone els know a way to do this .Kind regards
5 March 2023 at 5:55 am #793756Hi
I also listened to the sound and it sounds exactly like my plane.
I think its just the friction so as others have suggested as well try oiling the sole or put some wax under it.
Something else that may be the problem is that you are maybe pushing to hard on it.I hope this helped
Cheers
4 March 2023 at 3:37 pm #793668Hi
I also have this problem with my number 4.
I noticed it occured more often when i worked on end grain
It had to do with the way the iron lays on the frog if you check this and maybe flatten it it will probably improve.Another thing that may help is to put some oil or wax on the bottom of the plane to reduce friction which also helped for me.
I hope this helps you a little bit
Cheers.
Daniƫl
-
AuthorPosts