Forum Replies Created
-
AuthorPosts
-
9 October 2020 at 6:13 am #681503
I’ve had success using corrosion inhibitor spray and 400 grit sanding cloth. It does a pretty good job of removing light to moderate rust while leaving the patina. The rust inhibitor should also help prevent rust forming in the future.
After looking into the citric acid method that tenjin posted I will definitely try it on some heavily rusted pieces, thanks!
19 September 2020 at 7:28 pm #678776Thanks for your replys Barry and Dave.
After looking into the hinge mortising plane I would agree with you guys.
Colin, the metal part on the front is a long screw.
The screw is threaded through the metal circle.
The screw when tightened holds the cutting blade firmly in place against its bed.Thanks,
JoshAttachments:
You must be logged in to view attached files. -
AuthorPosts