Forum Replies Created
-
AuthorPosts
-
Thanks for your help. The problem was my tails were too short ( slightly under a 1/16). So they did not reach the end of the long grain but still under. I think this was because I was trying to do the knife wall to tight. I have added about 2/32 before I do the knife wall and this seems to work out better. Once again my thanks
[quote quote=123946]You are mostly probably using softwood like pine stay in from the knife line atleast a 32nd as you tap that will bring you to the knife line.[/quote]
Yes I am using softwood. Do you mean outside of the knife line (in the waste area) … wouldn’t this make the tail even shorter and the gap bigger?
-
AuthorPosts