Reply To: New acquisitions
…it as well. Maybe someone can tell me more about it. Not even sure what it is aside from a back saw. It’s heavy, cuts well. A carcass saw maybe?…
…it as well. Maybe someone can tell me more about it. Not even sure what it is aside from a back saw. It’s heavy, cuts well. A carcass saw maybe?…
…the “C” is for chromed, “11H” is for the cast head (33H is the forged head), “12” is the length of the rule being 12″, and “4R or 16R” is…
…they will be filled with tools and projects. Perhaps kids and grandkids, friends in woodworking, family and such. This is my dream coming true and the bench is really nice!!!…
…I cut a rabbet along the back… Great, but I don’t have a rabbet plane… I resorted to the jointer; dangit. Pic 7: Pic 8: Pic 9: Pic 10: New…
…x 5″ or so. Layout dovetails, box joints, mortise / tenon — whatever. Make my joints, fit them up, observe flaws, then saw them away, re-true the components, and start…
…the very first bit may not of taken to hardening process properly just hone back a little further. After that excellent edge retention. Around 6:30 mins little explanation https://m.youtube.com/watch?v=CBZ8446KqkM https://m.youtube.com/watch?v=TF4CzzQaZDo…
…together and planed to get the sizes required. Fortunately none of the individual component parts (i.e. aprons, well, top, legs etc.) exceeded the 12.5 inch width limit of the planer….
…of you, our supporters, in our work, none of this would be possible. Merry Christmas and Happy New Year! P.S. Make sure you watch Paul’s end of year vlog….
…See p.63 at this link for an example of using a center bead to make the moulding shown in figure 80 which has three parallel beads in the middle. https://books.google.com/books?id=1aQJAAAAIAAJ&pg=PA63&lpg=PA63&dq=center+bead+plane+double&source=bl&ots=bqdrgvEUeC&sig=fqOJ9l-daa_ViofZvdtwjFm7ZJI&hl=en&sa=X&ved=0CEkQ6AEwCmoVChMIsYPkg97ryAIVij0-Ch1TzQ_Z#v=onepage&q=center%20bead%20&f=false…
…combination: plane? Perhaps they will be releasing a Stanley 45/55 type of plane. Better start saving now! Sorry just saw @mtaylors reply about the combination plane, didn’t mean to duplicate….