Bullnose with Combination Plane
Episode 4 of the bookshelf project goes goes over creating the bull-nose roundovers around the top piece of wood. I’ve used this technique on the coffee table, and it works…
Search Results for: Test C1000-169 Dates πΈ C1000-169 Test Braindumps π₯ Test C1000-169 Dates π‘ Copy URL γ www.pdfvce.com γ open and search for [ C1000-169 ] to download for free πValid Dumps C1000-169 Book
Dining Chair – Episode 2
…a few mortises. Please note, here are two videos on: [button size=”large” type=”primary” link=”https://woodworkingmasterclasses.com/2015/09/making-an-arch-template/”]How to make an arch template video[/button] [button size=”large” type=”primary” link=”https://woodworkingmasterclasses.com/2015/09/making-a-small-square//”]How to make a small square video[/button]…
Reply To: Stanley side rebate plane No. 79 blades sharpening
…slope is accentuated, the tip of the blades comes out of the plane, which does not make it functional. If the tips of the blades do not come out of…
Reply To: Info on this odd No. 4, anyone?
Austin, You may have a Stanley Gage ‘auto-setting’ smoothing plane Type 1.perhaps early 1920’s Here is some info https://virginiatoolworks.com/2014/05/19/stanley-gage-planes-history-and-type-study/ https://workingbyhand.wordpress.com/tag/gage/ and it is similar to item ST49 onhttp://www.supertool.com/forsale/listm2015.html Enjoy! John…
Reply To: Stanley No. 4 – what am I doing wrong?
…Again, no guarantees, because this is also how you remove the burr and it might come off before you feel it. Yes, sometimes you’ll see a thin wire come off,…
Reply To: Which Starrett Combination Square to begin with
…protractor heads. I had an old (very) cheap combo square that I did not like or trust (and trust is very important). The Starrett is at least twice as heavy…
Reply To: Any experience with Narex chisels?
…are the replacement for the cheap Aldi-like chisels I tried before. They come with a nicely shaped handle, the varnishing is well made. One chisel got a very slight belly…
Reply To: Mortise Gauge Faulty?
Hi Harry Thanks I was looking at the combination veritas gauge (mortice gauge) and I had concluded that a mortice gauge/veritas combination gauge, was vital for the job of cutting…
Reply To: Tenon saw cuts to the right
These may help: https://paulsellers.com/2014/02/saw-questions-answered/ https://woodworkingmasterclasses.com/videos/saw-sharpening-setting-hammer-punch/ https://woodworkingmasterclasses.com/discussions/topic/refining-your-saw-set/…
Compound Angle Dovetails
…article from Popular Woodworking Magazine but found it dizzying. I’m looking to make a serving tray something similar to the link below but with lower angled, shallower sloped sides. https://www.popularwoodworking.com/projects/compound-dovetails/…