It’s clear that folks have been having a great time with a whole range of different projects over the last month or so. See below for a range of neat creations.


Desktop Organiser by Sharon Casa

Desktop Organiser by Sharon Casa

In cherry and walnut. Finished with Watco Danish oil and Trewax. Made for my 6 y.o. daughter.


Desktop Organiser by Chris

Desktop Organiser by Chris


Keepsake Box by rotaryw

Keepsake Box by rotaryw

Oak and walnut wood and mahogany veneer leaves, inlayed. Got inspired by different Pauls techniques and projects that I combined here. Finished with shellac and wax..


Wall-Hanging Saw Till by Rob M.

Wall-Hanging Saw Till by Rob M.

Storage till for my saws & layout tools. Inspired by Paul’s Tool Cabinet project, but narrower and without doors. The side panels of the cabinet are shaped to resemble the curved shape of a traditional hand saw. Cherry with Baltic birch ply for the back panel and drawer bottom. Finished w/ amber shellac.


Coffee Table by Orestis

Coffee Table by Orestis

Coffee Table made of Spruce/Pine


Carrying Tote by nemo

Carrying Tote by nemo

A small tote for clothesline pins. Made from recovered wood (unknown type, from drawers). Bottom is oak. Finished with acrylic varnish. Sixth attempt at dovetails but first time trying angled dovetails. Clamping for gluing would have been much easier if I had switched the tails and pins. Goes without saying but entirely made with hand tools using the techniques taught by mr. Sellers.


Oak Picture Frame by MIKE OBRYAN

Oak Picture Frame by MIKE OBRYAN


Desktop Organiser by MIKE OBRYAN

Desktop Organiser by MIKE OBRYAN


Tool Cabinet by MIKE OBRYAN

Tool Cabinet by MIKE OBRYAN

Pine tool cabinet, poplar/maple doors


Desktop Organiser by Marcus Austen

Desktop Organiser by Marcus Austen

Oak and Sapele desktop organiser for office. First time ever using half blind dovetails.


The Young Woodworker by Mike Lownsbro

The Young Woodworker by Mike Lownsbro

Teaching my daughter (Beth) how to flatten boards


Occasional Table by Patrick Price

Occasional Table by Patrick Price

Lost Stickley side table in teak with cherry drawer front.


300B Valve Amplifier by lhosinski

300B Valve Amplifier by lhosinski

Contoured Birdseye maple faces with Purple Heart posts. French polish finish


Toolchest by Patrick Rippl

Toolchest by Patrick Rippl

Chest made entirely of spruce, oiled and waxed. The geht’s saw is held by magnets. The drawer compartments are not glued in place so I can change them if necessary.


Set of Dovetail Marking Gauges by Rob Drown

Set of Dovetail Marking Gauges by Rob Drown

Followed Pauls process for making the group. The center is walnut and the light colored wood is maple.


Clothes Airer by Kurt Schultz

Clothes Airer by Kurt Schultz

Frame is white cedar harvested from a raised garden planter. Rails are from a wiry piece of maple. It has a nice figure and pattern, however it took a bit of effort to get to shape. This was my “aha moment” to sensitivity and really got me to make deliberate, careful approaches with various tools. Even the cedar proved to be multi-directional in grain. Not easy to see in clear cedar, but the plane sure “seen” it! This was probably my most technically challenging project to date. I am very happy with the outcome of it all.


'How 2' Table by Matthew Newman

‘How 2’ Table by Matthew Newman

My 7th project based on the How to Make a Table, this is my first one with a drawer. Made with maple and a black walnut drawer front


Garden Bench by philip higgins

Garden Bench by philip higgins

Garden Bench made with cypress pine with the able assistance of my 11 year old daughter. A wonderful time together.Spokwshave is my new favourite tool


Coffee Table in Oak by philip higgins

Coffee Table in Oak by philip higgins

First time working with with oak and first breadboard ends


Carrying Tote by Mike O'Neil

Carrying Tote by Mike O’Neil

Pine, mahogany, and oak pallet wood tool tote made using Paul’s rebate plane and dovetail template. Only hand tools were used – no power tools. I mixed a 1-pound cut of amber shellac for the finish.


Bench Stool by Volodymyr Tobolskyy

Bench Stool by Volodymyr Tobolskyy

Plain stool. Glued pine shield.


Desktop Organiser by David Vergona

Desktop Organiser by David Vergona

Walnut organizer with 3 coats shellac and past wax


Dovetail Box and Snake by Marc-Andre Petit

Dovetail Box and Snake by Marc-Andre Petit

Dovetail box made of pine with the snake made of cherrywood with my daughter. We had a blast when the head fell off at the last cut! We glued a little piece of wood in a saw kerf to held it back to the body!


Wallclock by rayc21

Wallclock by rayc21

Made from Walnut finished with four coats of shellac and waxing


Keepsake Box by mark leatherland

Keepsake Box by mark leatherland

Keepsake box I made out of parana pine I think! Not 100% certain. It was made as a gift for my Dad. The inlayed embellishment is significant as it was taken from a scrapped table which the top was made up of completely with this pattern. It belonged to my Nan, Dad’s Mum which they used throughout their lives. It got ruined by water damage so it was nice to re-use for this project which is my best to date.


Workbench by Dennis Droege

Workbench by Dennis Droege

Ash workbench from a tree our arboricultural service removed. Record vises from Ebay.


Sandbox/Coffee Table by ramisdom

Sandbox/Coffee Table by ramisdom


Toolchest by c fenton

Toolchest by c fenton

Tool chest made from pine. Stained with “golden oak” then finished with amber shellac and paste wax


Frame Saw by Patrick Rippl

Frame Saw by Patrick Rippl

Small frame saw made of oak and a bit of ebony. Tried the carving Paul showed in the hand mirror video.


Chisel Handles by Josef Zahn

Chisel Handles by Josef Zahn

Oak handle, chisel by Aldi(Hofer) and handle in ash, chisel by T.J.Gardner


'How 2' Table by Gabriel G.P.

‘How 2’ Table by Gabriel G.P.

Table to enjoy mornig cuppa in our backyard, made from soft “Redwood” with shellac finish, nothing fancy just plain square shape but I like that and I’m sure it’ll serve us for years to-come.


Saw Vice by Patrick Rippl

Saw Vice by Patrick Rippl

Saw vice made of recycled oak flooring.


Bird Feeder by Kurt Schultz

Bird Feeder by Kurt Schultz

In replacing a cedar post and rail fence, I repurposed a rail into a bird feeder. Cut and split the rails into planks for the roof, sides, perches and frame. Plexiglass panes. Fun Saturday project


Workbench by Yves Gaudreau

Workbench by Yves Gaudreau

Made from twisted white Birch cut here in Denholm Québec in 2003. Finished with “Tried & True Varnish oil”. None of the 8/4 by 8 feet long boards were straight enough to give 66 inches long boards. Even the boards for the aprons have been backed up with reclaimed yellow birch from some old kitchen cabinets. I laminated 24 to 34 inches long pieces to make the top and the well board. Great adventure, very pleased with the result. The hand planning of the top has been challenging with the grain changing direction every other board. But with the good advice from Paul on hand planing and sharpening (now I sharpen free hand 😀 ) have made the exercise possible for me. Thanks Paul!


Sawing Benches by Tony Yeates

Sawing Benches by Tony Yeates

Long needed, finally made during Covid-19 lockdown: a pair of English sawing benches. My first substantial project, beyond bench hook, shooting board and 2 crude but pleasing sharpening stone boxes.

I made different mistakes on each one but learnt quite a lot in the process.


Garden Shed by Benjamin P. Masseth

Garden Shed by Benjamin P. Masseth


Thank you to everyone who has sent a picture in!

If you would like to submit a picture to the gallery, please use the submissions form.

1 Comment

  1. GREG JORGENSEN on 4 July 2020 at 1:07 am

    Some exceptional work above! I’m new to the game and rough outcomes are not unusual, but I simply enjoy using my hands, being creative and zoning out from my rather intensive business of selling businesses. I call it therapy. Thankyou for sharing guys!

Leave a Comment

You must be logged in to post a comment.