Latest Activity
The latest posts, and comments from around the site.
-
avillalo commented on the post, Tool Chest: Episode 4 10 years, 8 months ago
Thanks Mark, the problem is plow plane’s nose get in the way and it didn’t let me plow unless the mortise is at least the distance between the blade and the nose. For the moment i can’t think another way to do […]
-
RL commented on the post, Tool Chest: Episode 4 10 years, 8 months ago
A plough plane does not work well for stopped grooves. I would use mortise chisel and a router plane to clean up the ends and bottom.
-
Paul Sellers commented on the post, Tool Chest: Episode 4 10 years, 8 months ago
Because in this case the grooves align with the mortise hole walls, we can use the walls to reference from and so not necessarily use the mortise gauge as in normal mortising operations. Also, the plough plane […]
-
Paul Sellers commented on the post, Tool Chest: Episode 4 10 years, 8 months ago
Hey Eddie, How are you. Here’s another point. In the US we use Plastic laminate glued in place with two sided tape like the tape used for picture mounts and also for carpets. This stuff wears only minimally and […]
-
Paul Sellers commented on the post, Tool Chest: Episode 4 10 years, 8 months ago
Hello George,
Well, I do make certain that my boards are as flat as possible, and to do this I plane the stock foursquare using the practices shown and outlined. I would like to point out something in our […]