Rocking chair corbel beading

Welcome! Forums Project Series Rocking Chair Rocking chair corbel beading

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #308561

    I found a simple way to be able to follow the shape of the corbel to make the beading design. I had an old drill circle cutter and all I needed to do was to reverse the blade so that the bevel was to the inside and adjust the cutter so the drill bit acted as a guide bushing. I was able to follow the shape and create the bead in minutes. Before that my lines were jagged as I just did not have the control, as Paul has, using a knife and/or chisel.


    Matt McGrane

    Awesome tip, Cliff. Thanks for that.

    Matt, Northern California - Started a blog in 2016:

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.