Forum Replies Created
-
AuthorPosts
-
Hey Eric! I’m in London too.
Timber is definitely available, as there is still plenty of construction going on around me! However, most of the larger businesses are running on skeleton staff or they’re shut.
I’ve found that the smaller builders/timber merchants are still open (Mum works at one).
I assume you are looking for timber for some projects? If you only need small amounts, skip hunting on your prescription daily walk is an alternative…
Hi Steven, Craig,
Assuming you have sharpened a larger saw before, the process is pretty much the same.
Firstly, just incase you have missed it, Paul does have a video on sharpening a gents saw: https://youtu.be/u0jAlXmfquo
I seem to remember Paul recommending that finer saws should always just be a rip cut, as it makes less of a difference the finer you go. I agree entirely! I own a gents saw myself (8 or 9” I think) which is 25ppi too.
Use a smaller file. I believe Paul has a list of recommended files and file sizes for different PPI. I think this is on his blog.
In terms of set, you might find that it cuts perfectly fine without set. I use mine without set, and it cuts just fine, granted a little wax/rag-in-a-can oil on the saw helps a bit. If you find that your saw needs a little set, use Paul’s “hammer and punch” method. Search “setting saws with a hammer & punch” on youtube.
Good luck! Don’t hesitate to ask If you need more help!
-
AuthorPosts