…butt hinges from Niche Locks were good enough I think; perhaps not manufactured to the same finish, but then again they’re priced at 1/3 of the Brusso ones. https://www.nichelocks.com/Cabinet-Hardware/Cabinet-Hinges?zenid=8137219b4968b42259bb7870c4568c2c /soj…
…completely whilst doing that (and it looks as though it might) just glue, refit, and clamp as normal. A wooden dowell could add some strength, but drilling & screwing would…
…plane (No 4) Jack Plane (No 5) (optional as used while thicknessing) Tenon saw No 80 Cabinet scraper Card scraper Thickness planing jig (https://woodworkingmasterclasses.com/2014/05/thickness-planing/) Shooting Board (https://woodworkingmasterclasses.com/2012/11/shooting-board/) * = optional…
…in the UK. The 1000 grit side is rather slow compared to soft stones, the 6000 is about comparable. I can accept a little dish so flatten fairly rarely, about…
…carbon above 0.5% plays little role in the hardening of the steels, rather it is intended to combine with other elements in the steel to form hard particles called carbides….
That’s a common problem with these vises. I know it has come up in a discussion before. It happens with mine as well. I think the solution is to back…
Forgot to add a pic of the stamp. The company was from the early 1800s until the late 1800s. It was purchased by another who kept the logo while Barton…
The Starrett’s come in models with cast iron heads or hardened forged steel. The rules come in regular or chromed. And you can get the single head or the square…
I love seeing these benches coming together. So inspiring to know that soon they will be filled with tools and projects. Perhaps kids and grandkids, friends in woodworking, family and…
I saw a picture of this chest. I was familiar with Paul from youtube, but at the time I did not want to commit to the membership here. Here is…