Dining Chair – Episode 2

Dining Chair 2

This is an episode in a paid series. Want to watch it? You just need to sign up as a paid member and you can enjoy this video and many other videos we think you will love.

With the back legs having had their initial shaping, Paul goes through the layout of the mortices for the front and back legs. Once he has ensured that the mortices match up between each set of legs and are the correct distances in from the outside edge, he cuts a mortice on a front leg.

Paul shows a few ways to temporarily attach a guide block to help keep your chisel square when chopping a mortise. This is particularly useful when you don’t have a guide made or a flat surface to register the guide against or are only chopping a few mortises.

Please note, here are two videos on:

[button size=”large” type=”primary” link=”https://woodworkingmasterclasses.com/2015/09/making-an-arch-template/”]How to make an arch template video[/button]

[button size=”large” type=”primary” link=”https://woodworkingmasterclasses.com/2015/09/making-a-small-square//”]How to make a small square video[/button]

Posted in ,

4 Comments

  1. mercified on 21 June 2018 at 12:36 am

    is the shorter guide block video above available for download?

  2. David C on 29 October 2018 at 12:20 am

    Where do I download the pdf file for this project?

    • Philip Adams on 31 October 2018 at 10:58 am

      Hello David, you can download them on the project information page. If you click “Previous: Dining Chair – Episode 1” just above the comments and do the same on episode 1 it will get you to the info page.

Leave a Comment

You must be logged in to post a comment.