Skip to content

Rocking Chair: Episode 12

Rocking Chair 12

This is an episode in a paid series. Want to watch it? You just need to sign up as a paid member and you can enjoy this video and many other videos we think you will love.

With all the joinery and shaping completed, the arms are fixed in place by boring through the legs before gluing and screwing them in place. Then the last detail to add is the corbels, which sit under the front of the arms. Then, with the holes in the back of the arms plugged, the chair is ready for it’s upholstered seat.

9 Comments

  1. Luiz Mattos on 21 December 2016 at 7:45 pm

    Paul, I noticed that your chair is with the seat supports already installed. Will this be shown in a future episode?

  2. AnthonyH on 21 December 2016 at 10:54 pm

    Thank you Paul. It seems so obvious after you’ve shown us, but I’ve always thought of cutting plugs along the grain like one would cut and hammer out a dowel. You’re tutorial helped me to realize that matching the grain and colour requires a crosscut plug and not a dowel. Thank you.

  3. rafi on 24 December 2016 at 5:05 pm

    Thank you, Mr. Sellers! A very Happy Christmas and many Blessings to you and your family. From Puerto Rico, La Isla del Encanto, The Isle of Enchantment… ¡Felicidades y Bendicones!

    Rafi

  4. dclare on 26 December 2016 at 5:09 am

    Merry Christmas to you and yours Paul. Thank-you for all the inspiration 🙂

  5. deanbecker on 27 December 2016 at 7:16 pm

    Clifford and Luis ,Paul showed how to install the seat cleats in the dining chair videos basically cut a 45 then get it into the corner tight ,mark the rear
    And cut it, then drill a diagonal hole just missing the angle and install a screw on either side

  6. knightlylad on 30 December 2016 at 9:32 pm

    Thank you for the lesson.

Leave a Comment

You must be logged in to post a comment.