Forum Replies Created
-
AuthorPosts
-
25 September 2018 at 12:53 pm #338175
Thank you very much. I have downloaded the PDF you provided and will put it in the que to build. thanks again
20 October 2017 at 11:16 am #337616Hello, new guy here,
I just installed mine this past weekend by recessing the vise 3/4 of an inch into the apron (which is 1.5 inches thick) and using a piece of 3/4 inch jaw material to bring it flush again to the apron. I was a little concerned because I felt like I might not be able to do it right but it turned out really well. This allowed me to use the front bolt holes. I have an Eclipse 9 inch vise which is very similar I think. My top is laminated 2x4s20 October 2017 at 11:04 am #337614Hello, new member here,
I just installed my 9 inch Eclipse this past weekend. I will post pics if I can figure out how to do it. I ran into the same issue with the apron blocking the front bolt holes and I solved it by recessing the vise into the apron 3/4 of an inch and inserting a 3/4 piece of jaw material to bring it flush again to the apron. -
AuthorPosts